User Manual

7/7
© GEMPLUS
An example of wiring diagram is depicted in Figure 4:
In this example, when the door is required to open, the green indicator and the beeper
are activated.
Figure 4: Example Wiring Diagram
Wiring diagram
Door strike
+
-
To controller
+12V
GROUND
Reader DATA0
Reader DATA1
Door Open
Tamper input
Tamper input
Connect the cable shield to earth
Add Ferrite
WURTH reference 7442 712 22 or 742 7007
on the cable at 45 cm from the device
Signal
+12V
GND
DATA0
DATA1
GND
BEEP
RLED
GLED
TAMP1
TAMP2
wire
Red
Black
Green
White
Blue
Red/Black
Green/Black
Orange/Black
Orange
White/Black
Shield
Pin
J1-1
J1-2
J2-1
J2-2
J2-3
J4-1
J4-2
J4-3
J3-1
J3-2
ii WARNING ii
WURTH reference 742 712 22 or 742 7007