User's Guide

8
Using the touch screen:
There are two actions to navigate through the touch screen:
Flick: Flick up or down the screen to view menu options. A flick action will move the menu one full screen.
Tap: Select a parameter setting to update. For other parameters (eg Pressure Relief, Airplane mode), tap
the parameter to turn it on or tap to turn it off .
Personalizing your settings
The device has been set up for your needs by your care provider, but you may want to make adjustments
to make your therapy more comfortable.
1. Tap MY OPTIONS from the Home screen.
2. Tap the parameter you wish to change.
3. Tap the preferred setting.
Tap OK to confirm the change or CANCEL to go back to the previous screen.
Additional features
There are some other features on your device which you can personalize.
Menu
Function
Description
MY
OPTIONS
Ramp Time
Period during which the pressure increases from a low start pressure to the
prescribed treatment pressure.
Ramp Time can be set to Off, 5 to 45 minutes (in 5-minute increments), or
Auto.
Pressure
Relief*
When EPR is enabled, you may find it easier to breathe out. This setting can
help you get used to therapy.
SmartStart*
When SmartStart is enabled, therapy starts automatically when you breathe
into your mask.
SmartStop*
When SmartStop is enabled, therapy stops automatically after a few
seconds when you remove your mask.
MORE
Mask Fit
This function helps you assess and identify possible air leaks around your
mask.
*Features enabled by your care provider.
Note: Not all functions are available in all regions. Functions vary based on therapy mode.