User's Guide
Table Of Contents
- 398001.pdf AirSense 11 User Guide AMER Eng Ref
- 398001 Spec
- 398001 Pacific Cover CMYK_Eng HiRes
- 398001_AirSense 11 User Guide Eng Ref FINAL
- Welcome
- At a glance
- Setting up your device
- Navigating the touch screen
- Starting/Stopping therapy
- About the heated tubing
- Therapy data
- Cleaning and caring for the device
- Traveling
- Troubleshooting
- General warnings
- Technical specifications
- Guidance and manufacturer’s declaration electromagnetic emissions and immunity
- Symbols
- Servicing
- Limited warranty
- Further information
- 398001 Pacific Cover CMYK_Eng HiRes
- DRAFT 398120 Airsense 11 FCC SAR (4G) Amer Eng Fre_v2
![](/manual/gemalto/air114g/user-s-guide-english-french/images/img-11.png)
English 9
Connecting your AirSense 11 device and smart device
RMDpulse is a smartphone app that guides you through the setup process. This includes device setup
videos, mask fitting videos, trying therapy using the Test Drive feature, and tracking your sleep health
progress. The app is not required to operate the AirSense 11 device.
Before pairing the AirSense 11 device to a smartphone, ensure the app's latest version is installed on the
smartphone. If not, download the app from the App Store
®
or on Google
®
Play. Pair the AirSense 11 device
to your phone. To set up the app, go to the MORE menu.
1. Ensure your AirSense 11 device is set up correctly and plugged into a power source.
2. Launch the RMDpulse app. Tap Continue.
3. Follow the prompts on the RMDpulse app to complete the BT connection.
AirSense 11 is now connected to the app. The Bluetooth connection symbol appears on the status bar
to confirm the connection between the AirSense 11 device and the smartphone.
4. Tap Done.
Starting/Stopping therapy
WARNING
The machine is not intended to be operated by persons (including children) with reduced physical,
sensory or mental capabilities without adequate supervision by a person responsible for the
patient’s safety.
To start therapy:
1. Fit your mask
2. Press the Start therapy/Standby button or breathe normally if
SmartStart is enabled.
Therapy will begin and the Treatment screen is displayed. A dynamic
pulse wave will appear during therapy.
Notes:
• The screen will fade and then go black automatically after a short period of time. Tap the screen to turn
it back on.
• If power is interrupted during therapy, the device will automatically restart therapy when power is
restored.
• The device has a light sensor that adjusts the screen brightness based on the light in the room.
To stop therapy:
1. Remove your mask.
2. Press the Start/Standby button or wait until the device stops if SmartStop is enabled.