User's Guide

12
To remove the SD card cover and insert SD card:
1. Push the SD card cover.
2. Remove the SD card cover and keep the SD card cover in a safe place.
3. Insert the SD card.
4. Push in the SD card until it clicks in place.
To remove the SD card:
1. Push in the SD card to release it.
2. Place the SD card in the protective folder and follow your care provider’s instructions.
For more information on the SD card, refer to the SD card protective folder provided with your device.
Cleaning and caring for the device
WARNING
• Beware of electrocution:
• Do not immerse the device, AC Adaptor or power cord in water.
• Do not connect to power while the device is wet. Make sure that all parts are dry before
plugging it in.
• If liquids are spilled into or onto the device, unplug the device and let the parts dry.
• Always unplug the device before cleaning and ensure that all parts are dry before plugging it
back in.
• Do not perform any maintenance tasks (eg, cleaning, changing the air filter) while the device is in
operation.
• Clean the device and its components according to the schedules shown in this guide, to maintain
the quality of the device and to prevent the growth of germs that can adversely affect your
health.
• Regularly inspect power cords, cables, and power supply for damage or signs of wear.
Discontinue use and replace if damaged.
• Do not open or modify the device. There are no user serviceable parts inside. Repairs and
servicing should only be performed by an authorized ResMed service agent.