Installation Guide

Acknowledgement: You acknowledge that you have read this LIMITED WARRANTY, understand it and agree to be bound by
its terms and conditions.
You also agree that: (1) No oral or written information or advice given by CalAmp, its dealers, distributors, agents or employees
shall in any way increase the scope of this Limited Warranty and you may not rely on any such information or advice; (2) Unless
a written governing agreement signed by you and CalAmp exists, this License Agreement is the complete and exclusive
statement of agreement between CalAmp and you regarding the licensing of the Software, Documentation and Related Materials
and supersedes all proposals, oral or written, and any other communications you may have had prior to purchasing your license;
(3) Except for the price and delivery terms agreed upon by both parties, the terms and conditions of this License Agreement shall
supersede those set forth in any purchase order where the purchase order conflicts or is inconsistent with or adds to the terms
and conditions of this License and those superseded purchase order terms and conditions shall be null and void; (4) You agree to
assure that copies of this License Agreement are distributed, read and agreed to by each Developer using the Software and/or
Documentation.
Governing Law: This Agreement shall be governed by the laws of the State of California, United States, excluding its conflicts of
law principles and excluding the United Nations Convention on Contracts for the International Sale of Goods. You agree to
exclusive jurisdiction of California State federal and state courts, Orange County, for resolution of any dispute related to this
Agreement.
U.S. Government Protected Rights: The Software Documentation and Related Materials are provided with RESTRICTED
RIGHTS. Use, duplication or disclosure by the Government is subject to restrictions as set forth in subparagraph ©(1)(ii) of the
Rights in Technical Data and Computer Software
clause at DFARS 252.227-7013 or subparagraphs ©(1) and (2) of the Commercial Computer Software-Restricted Rights at 48
CFR 52.227-19, as applicable. Manufacturer is CalAmp Wireless Networks Inc., 15635 Alton Parkway, Suite 250, Irvine, CA
92618. Rights are reserved under copyright laws of the United States with respect to unpublished portions of the Software.
[edit]
3 Regulatory Information
Human Exposure Compliance Statement Pursuant to 47 CFR § 24.52 of the FCC Rules and Regulations, personal
communications services (PCS) equipment is subject to the radio frequency radiation exposure requirements specified in §
1.1307(b), § 2.1091 and § 2.1093, as appropriate.
CalAmp Wireless Networks Inc. certifies that it has determined that the HMU-3640™ complies with the RF hazard requirements
applicable to broadband PCS equipment operating under the authority of 47 CFR Part 24, Subpart E of the FCC Rules and
Regulations. This determination is dependent upon installation, operation and use of the equipment in accordance with all
instructions provided.
The HMU-3640™ is designed for and intended to be used in fixed and mobile applications. “Fixed” means that the device is
physically secured at one location and is not able to be easily moved to another location. “Mobile” means that the device is
designed to be used in other than fixed locations.
FCC Rules and Industry Canada (IC) regulatory information Compliance Statement (Part 15.19) The equipment device complies
with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received including interference that may cause undesired
operation. Warning (Part 15.21) Changes or modifications not expressly approved by CAlampcould void the user’s authority to
operate the equipment. Manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to
this equipment. Compliance Statement (Part 15.105(b)) Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures: —
Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the
equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an
experienced radio/TV technician for help. This device complies with Industry Canada license-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le
présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre le fonctionnement. Class B digital device notice “CAN ICES-3
(B)/NMB-3(B)” RF Radiation Exposure Statement “The device has demonstrated compliance with the RF Exposure requirements
of FCC Part 2.1093 and RSS102 Issue 5”