User Manual
Document Reader AT9000 MK2 User Guide Introduction
Page 3 of 33
Preface
This user guide describes the features and functions of the Gemalto Document Reader AT9000 MK2
(PV60-xx-xx-xx).
Revision History
Version
Date
Description
A
Feb 27, 2013
Release version
B
June 2015
Updated contact info
C
Feb. 2016
EMC compatibility notice
D
Aug 2017
Gemalto
Electromagnetic Compatibility (EMC)
The Products are designed to be immune to levels of interference generated within an office environment
and not to interfere with other equipment. In order to provide this level of compatibility the Product, its
cabling and Power Supply Unit (PSU) or its installations, must not be modified in any way.
Modifications or changes to the Product, the interface cables or the power
supply not expressly approved by the manufacturer could void the User's
authority to operate the Product and/or break local laws or regulations.
In some situations AC line transients or Electrostatic Discharge may cause a
loss of communication between the document reader and the host application.
If this occurs, it may be necessary to restart the host application, or unplug
and reconnect the USB cable, or power cycle the document reader in order to
restore operation.
For further regulatory information or copies of certificates contact your local Gemalto representative or
direct your questions to technical.service@gemalto.com
EMC Compliance Europe
The Product meets the following European Council Directives:
Scanner: EMC (2014/30/EU), RFID Option RED (2014/53/EU)
PSU: EMC (2014/30/EU), LVD (2014/35/EU)
FCC/Canada Radio Frequency Rules and Regulations
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the Federal Communication Commission (FCC) Rules. These limits are designed to provide
a reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his/her own expense.