Prox-DU Dual Interface Contact & Contactless USB Smart Card Reader Quick Installation Guide www.gemalto.
Prox–DU Quick Installation Guide Prox–DU view Contactless card blue indicator Contact card yellow indicator 1m80 USB cable USB A plug Contactless card landing zone Contact card insertion slot Prox–DU computer installation Plug the USB cable into the USB port of your computer and follow the onscreen instructions when the installation wizard appears. Use the PC/SC driver package or web link available in the Gemalto web site http://support.gemalto.
Prox–DU Quick Installation Guide Prox–DU operation table Card Indicator Off Slow Blink (0,2 s / 2 s) Blink (0,5 s / 1 s ) On Flashing Description The card interface is deactivated The card interface is ready The card is present and inactive (powered off) The card is present and active (powered on) The card communication is in progress To protect the smart card from undesired operation the contactless interface is deactivated when a contact card is detected by the reader.
Prox–DU Quick Installation Guide Rating: 5V 200mA - Accessories for use with UL Listed Computers having limited power or class 2 output. Intended to be used with a Limited Power Source. Regulatory information Notice for the USA: FCC Statement The Federal Communications Commission (FCC) Radio Frequency Interference Statement (USA Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
