User's Guide

English 5
Technical specifications
Dimensions (H x W x L)
RCM only: 5.28" x 1.73" x 5.91" (134 mm x 44 mm x 150 mm)
The stand will add 0.12" (3 mm) to the height and 0.24" (6 mm) to the width.
Weight
RCM only: 0.62 lb (280 g)
The stand will add 0.07 lb (30 g) and the wall mount will add 0.02 lb (10 g).
Power supply unit (PSU)
AC 100–240 V, 0.35–0.70 A, 50–60 Hz
DC 24 V, 1.25 A
Cable length 5'10" (1.8 m)
Class II, suitable for continuous operation
Typical power consumption; <3W
Maximum power consumption: <5W
Housing construction
Flame retardant engineering thermoplastic and silicon
Environmental conditions
Operating temperature:
Operating humidity:
Operating altitude:
Storage and transport temperature:
Storage and transport humidity:
+32
o
F to +104
o
F (+0
o
C to +40
o
C)
10%–95% non-condensing
Sea level to 9842.5 ft (3000 m)
-13
o
F to 158
o
F (-25
o
C to +70
o
C)
10%–95% non-condensing
Electromagnetic compatibility
Product complies with all applicable electromagnetic compatibility
requirements (EMC) according to IEC60601-1-2, for residential, commercial and
light industry environments. It is recommended that mobile communication
devices are kept at least 12” (30cm) away from the device.
IEC 60601-1 classification
Non-transit operable, portable equipment
Compatible software versions
AirView: 4.1 or higher
Astral: SX544-0401 or higher
Stellar: SX483-0250 or higher
Wireless module
Technology used: 4G/3G
FCC ID: 2ACHL-RCM4G
The RCM device complies with FCC Rules.
Additional information regarding the FCC Rules for this device can be found on
www.resmed.com/downloads/devices.
IC ID: 9103A-RCM4G
The RCM device complies with Industry Canada Rules.
Additional information regarding the Industry Canada Rules for this device can
be found on www.resmed.com/downloads/devices.
Separation
The RCM device should be used at a minimum distance of 0.8” (2 cm) from the
body and ideally 12" (30 cm) from the ventilation device during operation.
Design life
5 years
The RCM and PSU do not contain any serviceable parts.
Note: The manufacturer reserves the right to change these specifications without notice.