ICAM-WHD-02 USER MANUAL HANDBUCH HANDLEIDING MANUEL DESCRIPTIF РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ КЕРІВНИЦТВО КОРИСТУВАЧА INSTRUKCJA OBSŁUGI HD SMART WIFI CAMERA HD SMART WIFI IP-CAM SMART HD WIFI CAMERA CAMESCOPE NUMÉRIQUE HD + WIFI WIFI СМАРТ-КАМЕРА, 720P WIFI СМАРТ-КАМЕРА, 720P WIFI HD SMART KAMERA
ICAM-WHD-02 HD SMART WIFI CAMERA Features HD 720p indoor WiFi IP-camera with built-in microphone WiFi function - easily connect the camera to your network via your smartphone or tablet Free mobile apps allow you to monitor your camera from all over the world via internet Includes camera control software for Windows Motion detection and alarm alerts by e-mail Place it on any flat surface, or easily mount it to a wall or ceiling Specifications InterfacesWiFi: 802.
ICAM-WHD-02 HD SMART WIFI CAMERA Web-protocols supported: TCP/I, UDP/IP, HTTP, SMTP, FTP, DHCP, DDNS, UPNP, NTP, RTSP, ONVIF Built-in speaker Built-in IR backlight and IR-CUT filter MicroSD card up to 64 GB supported Power consumption: 5 VDC up to 1 A, no battery inside AC power adapter: 100 - 240 V AC input, 5 V DC output up to 1 A Dimensions: 70 x 70 x 110 mm Weight: 0.2 kg Operating conditions: -10 - 50 Celsius degrees at 10-85% humidity FOR INDOOR USE ONLY GEMBIRD EUROPE B.V.
ICAM-WHD-02 HD SMART WIFI CAMERA INTRODUCTION. Thank you for purchasing the ICAM-WHD-02 HD smart WiFi camera! This manual will explain how you can connect the camera to the internet in a few easy steps. Once connected, you can view/monitor the video feed anywhere in the world, via your smartphone, tablet or PC. GEMBIRD EUROPE B.V. http://www.gembird.
ICAM-WHD-02 HD SMART WIFI CAMERA CAMERA OVERVIEW AND SETTING UP. Reset & WPS/QSS Lens SD card DC Power adapter You can place this HD smart WiFi camera on the desktop or fix it on the wall or ceiling. Use on desktop : Just put camera on the desk and adjust the view angle to your preference. Mounting on the wall: GEMBIRD EUROPE B.V. http://www.gembird.
ICAM-WHD-02 HD SMART WIFI CAMERA The bracket consists of 2 parts. Use a flat screwdriver to carefully remove the bottom mounting plate from the camera base. Fix the mounting plate to the wall or ceiling with appropriate screws/plugs. Then click the camera base onto the fixed mounting plate on the wall. Adjust the view angle to your preference and you’re done! Connect the included power adapter to the camera to power up the camera. When you see the blue LED blinking, it means camera is ready for setup.
ICAM-WHD-02 HD SMART WIFI CAMERA CONNECTING IP CAMERA TO WIFI AND INSTALLING AND USING THE MOBILE APP INSTALLING APP: 1. Open the Apple App store or Google Play store on your phone/tablet and search for “iVIEW PRO”. Download and install the iVIEW PRO app on your phone or tablet. APP REGISTRATION AND LOGIN: 2. When you open the app for the first time, you have to two options.
ICAM-WHD-02 HD SMART WIFI CAMERA I. Open your app on the phone and click on “Register”. GEMBIRD EUROPE B.V. II. Input your email address and create password http://www.gembird.
ICAM-WHD-02 HD SMART WIFI CAMERA III. Enter the random code (case sensitive) and press “register”. GEMBIRD EUROPE B.V. IV. now login with your email address and password http://www.gembird.
ICAM-WHD-02 HD SMART WIFI CAMERA CONNECTING THE IP CAMERA TO WIFI: 3. Now please power the camera on with power adapter. Make sure your phone WiFi is turned on. The camera now starts up and will start beeping every other second. Follow next steps to connect camera to wifi. I. Press “+” to connect the camera and add it to the device list. II. Three ways for connecting, Smart link manual add and via QR code. GEMBIRD EUROPE B.V. http://www.gembird.
ICAM-WHD-02 HD SMART WIFI CAMERA 4. Now press the plus (+) sign in the top right corner of the screen to add a camera to the app camera list. 5. There are two ways for connecting your camera: I. Smartlink II. Add manually. III. QR code scan (only if QR code is present on your camera) Easiest is the Smartlink option. To use this, put the phone near the camera. Listen carefully, the Smartlink option only works when the camera is beeping every other second.
ICAM-WHD-02 HD SMART WIFI CAMERA I. Press “connect via wifi” button GEMBIRD EUROPE B.V. II. Enter the password of your wifi network http://www.gembird.
ICAM-WHD-02 HD SMART WIFI CAMERA III. If you hear the camera beeping, continue by pressing blue button. (Not beeping? Reset camera first) GEMBIRD EUROPE B.V. IV. Turn up the volume of your phone/tablet and click ‘next’ http://www.gembird.
ICAM-WHD-02 HD SMART WIFI CAMERA V. You will now hear sonic connection tone sequence from phone. Please wait… GEMBIRD EUROPE B.V. VI. When connected, you can name your camera and enter the camera password (123). Click ‘save’. http://www.gembird.
ICAM-WHD-02 HD SMART WIFI CAMERA Adding camera manually: If your camera is already connected to your home wifi (online camera) and you want to add it to the iVIEW PRO app on your second phone/tablet, you can add it manually. For this, you need the camera ID number and its password. The ID number is written on a sticker on the camera itself. The default password is 123, but if you changed this password, you should use the camera’s current personal password to add it.
ICAM-WHD-02 HD SMART WIFI CAMERA HOW TO USE THE APP / VIEW CAMERA VIDEO FEED: Function and button overview: GEMBIRD EUROPE B.V. http://www.gembird.
ICAM-WHD-02 HD SMART WIFI CAMERA 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Mute button Enable full screen mode Toggle alarm mode Microphone button (hold to talk) Snapshot button Settings menu button Video quality settings Toggle alarm mode Mute button Microphone Snapshot button Live video feed from camera Exit camera Exit full screen mode GEMBIRD EUROPE B.V. http://www.gembird.
ICAM-WHD-02 HD SMART WIFI CAMERA GEMBIRD EUROPE B.V. http://www.gembird.
ICAM-WHD-02 HD SMART WIFI CAMERA 1. Device information Check device information (e.g. device ID number) and change camera name. 2. Time settings. The camera should show the right time automatically. If not, you can also set it manually. First set the correct time zone (for NL, DE, FR, BE, CZ set time zone to UTC+1) and press ‘application’ in the Time zone setting area. Then check if time and date are correct and press ‘application’ in the Time setting area. Time should now be correctly set.
ICAM-WHD-02 HD SMART WIFI CAMERA 3. Media settings Here you can setup video format (set to PAL for EU), device volume and also invert the camera image. This is required when the camera is mounted upside down on e.g. a ceiling. GEMBIRD EUROPE B.V. http://www.gembird.
ICAM-WHD-02 HD SMART WIFI CAMERA 4. Safety settings 5. Network settings GEMBIRD EUROPE B.V. The default password for your camera is 123. This is a very weak standard password. It is highly recommended to change it to a stronger personal password. The administrator password gives access to all camera functions. You can also set a separate Guest password for viewing only (no administrator rights). You can switch between wired and wifi connection method here. http://www.gembird.
ICAM-WHD-02 HD SMART WIFI CAMERA 6. Alarm settings Here you can setup motion detection and alarm messages. Enable “receive warning message” to receive push message alarm notifications on your phone/tablet. If you enable motion detection, you can set the sensitivity by moving the slider to lower or higher level. You can also enable an alarm buzzer (siren) which will sound from the camera when motion is detected. The buzzer duration can be set to 1/3/5 minutes.
ICAM-WHD-02 HD SMART WIFI CAMERA 6.1 Email settings If you press the “Alarm mailbox” option, the email settings screen appears. Here you can setup your email account information to enable the camera to send you an email message in case of an alarm detection. The email message will be just a short message to notify you of the alarm and it will have a snapshot attached. The camera supports the most used email services like Gmail, Outlook, yahoo, etc.
ICAM-WHD-02 HD SMART WIFI CAMERA 7. Recording settings Setup recording settings to manual, alarm-triggered or scheduled recording. To use the recording function, a micro SD card must be inserted into the camera. If you select the timed video recording option, the camera will record automatically on the predefined time-period. When the SD card is full, it will automatically overwrite the oldest recordings. If you select the alarm recording option, the camera will only record when motion is detected.
ICAM-WHD-02 HD SMART WIFI CAMERA USING PC SOFTWARE: This camera can be used together with the CMS camera software. You can download this software from our website, www.gembird.nl. With the CMS software package, you can monitor the live feed of multiple cameras on your PC. Follow below steps to install the software and set it up for first use. 1. Downloading the software to the PC from the camera’s product page on www.gembird.nl 2. Install the software onto your PC. Follow the directions on your screen. 3.
ICAM-WHD-02 HD SMART WIFI CAMERA On the left side of the "CMS" software interface, there is a button. Click this button to add a camera to the software. A list will be shown with all available cameras within your network. Select the camera you want to add, enter the device name, ID and password and click ok. GEMBIRD EUROPE B.V. http://www.gembird.
ICAM-WHD-02 HD SMART WIFI CAMERA 4 .Device monitor in the PC. Open CMS software , right click device name - 》 start monitor , as the following picture: 5 .The video setting in PC.
ICAM-WHD-02 HD SMART WIFI CAMERA FAQ Q: How to restore the factory default settings? A: There is one small hole at the bottom of the camera. Press the small reset button inside with until you hear a sound like "drawing a sword”. This sound means that the reset was successful. Q: Failure when adding devices A: Please check that if the camera and the phone are in the same LAN. If the camera and the phone aren’t in the same LAN, users should use ID number to manually add the camera.
ICAM-WHD-02 HD SMART WIFI CAMERA 4. ONE KEY WIFI CONFIGURATION BY WPS/QSS. Power on the camera and wait for about 1 minute, press and hold the reset button for 3 to 5 seconds and then release it, the LED Status light will be always ON. Click the “WPS/QSS” button on the router, the camera and router will be configured WiFi by WPS/QSS protocol.
ICAM-WHD-02 HD SMART WIFI CAMERA (ENG) Declaration of conformity This product is tested and complies with the essential requirements of the laws of member states concerning R&TTE(1999/5/EC). The CE declaration can be found under www.gembird.eu (NL/BE) Verklaring van overeenstemming Dit product is getest en voldoet aan alle geldende nationale en Europese richtlijnen en regelgeving met betrekking tot R&TTE (1999/5/EC).
ICAM-WHD-02 HD SMART WIFI CAMERA Waste disposal: Entsorgungshinweise: Do not deposit this equipment with the household waste. Improper disposal can harm both the environment and human health. For Information about waste collection facilities for used electrical and electronic devices, please contact your city council or an authorized company for the disposal of electrical and electronic equipment. Werfen Sie dieses Gerät nicht in den Hausmüll.
ICAM-WHD-02 HD SMART WIFI CAMERA WARRANTY CONDITIONS GARANTIE BEDINGUNGEN The receipt must clearly list the date of purchase and the part number, in addition it should be printed. Keep the receipt for the entire warranty period since it is required for all warranty claims. During the warranty period the defective items will be credited, repaired or replaced at the manufacturer's expense. Work carried out under the warranty neither extends the warranty period nor starts a new warranty period.
ICAM-WHD-02 HD SMART WIFI CAMERA GARANTIE VOORWAARDEN CONDITIONS DE GARANTIE Op de aankoopbon moeten de aankoopdatum en productomschrijving duidelijk vermeld staan. Gelieve de aankoopbon de gehele garantieperiode te bewaren, deze is ten alle tijden benodigd voor alle garantie aanspraken. Tijdens de garantieperiode zullen alle gebreken verholpen of vervangen worden door de fabrikant d.m.v. reparatie, omruiling van het defecte onderdeel of het gehele apparaat.
ICAM-WHD-02 HD SMART WIFI CAMERA ГАРАНТИЙНЫЙ ТАЛОН УМОВИ ГАРАНТІЙНОГО ОБСЛУГОВУВАННЯ 1. Гарантийное обслуживание предоставляется в течение срока гарантии, при наличии правильно и четко заполненного гарантийного талона, и изделия в полной комплектации. Серийный номер и модель изделия должны соответствовать указанным в гарантийном талоне. 2. Гарантийное обслуживание представляет собой бесплатное устранение всех неполадок (ремонт), или замену изделия на новое (аналогичное). 3.