Operation Manual

29
GEMBIRD EUROPE B.V. http://www.gembird.eu
All brands and logos are registered trademarks of their respective owners
ICAM-WHD-02
HD SMART WIFI CAMERA
4. ONE KEY WIFI CONFIGURATION BY WPS/QSS.
 Power on the camera and wait for about 1 minute, press and hold the
reset button for 3 to 5 seconds and then release it, the LED Status
light will be always ON.
 Click the “WPS/QSS” button on the router, the camera and router will
be configured WiFi by WPS/QSS protocol.
 After configuration successfully, the LED status light on camera will
flash quickly for some seconds, then it will beconnected to router
automatically and LED lights will be always ON.