LECTEUR MOBILITY CLASSIC MP3 Manuel d’instructions www.amarina.
Consignes de Sécurité : 1. 2. 3. 4. 5. N’utiliser aucun produit liquide ni aucun aérosol. Nettoyer à l’aide d’un chiffon humide. Ne jamais utiliser le produit à proximité d’un point d’eau. S’assurer qu’aucun objet ni aucun meuble ne s’appuie sur le cordon. Les réparations doivent être effectuées par des techniciens qualifiés. Procéder à l’installation en respectant les instructions du fabricant.
MANUEL D’INSTRUCTION TABLE DES MATIERES RESUME DES CARACTERISTIQUES.......................................................... INTRODUCTION ........................................................................................... x Définitions des touches et contrôles................................................. 4 5 5 x Ecran d’affichage............................................................................... 6 x Indicateur de piles.............................................................
AUTRES REGLAGES…………………………………....................................... 20 x Choisir différents dossiers.................…………….............................. 20 x Effacer un fichier................................................................................ 20 x Mode de répétition (sous menu lecture)…..................................... 22 x Vitesse de lecture..................………….............................................. 22 x Mode de répétition .........................................................
Ce produit représente une nouvelle génération de lecteurs MP3 comprenant MP1, MP2, MP3, WMA, WAV. RESUME DES CARACTERISTIQUES Ɣ Taille compacte. Ɣ Compatible avec presque toutes sortes de fichiers musicaux tels que: MP1, MP2, MP3, WMA, WAV. Ɣ Compatible avec les améliorations de microprogrammes. Ɣ Pas besoin d’installer un programme pour WIN2000 ou les systèmes d’exploitation ultérieurs Le lecteur peut être utilise comme clé USB Ɣ Cryptage de disque et partition de disque.
INTRODUCTION Nous vous remercions d’avoir acheté ce baladeur MP3 Veuillez lire le manuel d’utilisation attentivement avant d’utiliser cet appareil. Les fonctions décrites dans ce manuel peuvent faire l’objet de changements dans un but de progrès technique sans préavis spécial. x Définition des touches et contrôles - Avance rapide; - Retour rapide; - Lecture/Pause 1� “Lecture/Pause”: MARCHE/LECTURE/STOP/ARRET. 2� “Mode”: Touche de confirmation générale. 3� “VOL+”: Augmentation du volume sonore.
x Ecran d’affichage Traduction : Mode de programme, taux de transfert/format du fichier, Mode de répétition, numéro de la chanson, mode musical, indicateur de la pile. x Indicateur de la pile Cet appareil fonctionne avec 1 pile LR03 AAA 1.5V. Affiche le statut actuel du carré noir s’affiche comme illustré ci-contre. Lorsque la pile est vide, le carré devient blanc. Lorsque la pile est pleine, ré ci-contre. FONCTIONS PRINCIPALES x Accéder au menu Appuyez sur “Mode” pour accéder au menu.
o Ecran de mode musical: o Ecran de mode d’enregistrement: o Ecran de mode de lecture d’enregistrement: o Ecran de réglage du système: o Ecran de connexion avec le PC: x Réglage du volume Appuyez sur “VOL+” pour augmenter le volume. Appuyez sur “VOL–” pour baisser le volume.
x Marche/Arrêt x Appuyez 2 secondes sur ‘’Lecture/Pause”pour allumer le lecteur MP3. En cours de lecture, Appuyez sur “Lecture/Pause” pendant 2 secondes pour éteindre le lecteur MP3. Lecture/Pause En mode musical, appuyez sur “Lecture/Pause” pour lire les fichiers musicaux. x Enregistrement/Pause En mode d’enregistrement, appuyez sur cette touche pour commencer ou terminer l’enregistrement, appuyez pendant 2 secondes pour arrêter l’enregistrement.
x Affichage du titre et des paroles des chansons Ce lecteur est compatible avec les textes en formats “*.LRC” et les fichiers .LRC .Le lecteur MP3 peut afficher les textes pendant la lecture de la chanson. o Comment utiliser les fichiers de paroles de chansons (*.LRC)? Le .LRC doit avoir le même nom que la chanson. Par exemple: Si la chanson s’appelle : Love.mp3 Alors du fichier texte sera : Love.lrc o Comment s’assurer que le MP3 a reconnu le fichier .
2. Appuyez sur ” pour sélectionner le mode d’enregistrement. 3. Appuyez sur “Mode” pour accéder au mode d’enregistrement : 4. Appuyez Les sur “Lecture/Pause” pour commencer l’enregistrement. fichiers enregistrés peuvent être sauvegardes soit dans le dossier du lecteur ou dans le sous-dossier. Si le message “Disk full” apparaît à l’écran, cela signifie qu’il n’y a plus assez de place disponible pour les fichiers à enregistrer.
: Enregistrement fin : fichier en format .WAV, qui possède la meilleure qualité mais crée des fichiers plus lourd. : Enregistrement long : fichier de format .ACT avec un son de qualité moyenne. : Enregistrement contrôle vocal de haute qualité : Format .WAV. Dans ce mode, le lecteur MP3 n’enregistre rien s’il n’y a pas de son. L’enregistrement est en format .WAV pour un son de meilleure qualité. : Cf. ci-dessus, mais sur format .ACT. 5. Appuyez sur “Lecture” pour commencer l’enregistrement.
2. Sélectionnez un enregistrement. 3 .Cliquez sur “Convertir” pour créer un fichier .WAV.
Vous pouvez aussi convertir les fichiers .WAV en format MP3 de la même manière. REGLAGE DU SYSTEME x Comment changer les réglages du système 1. Accédez au menu principal 2. Appuyez sur pour choisir “SYS” 3. Appuyez sur “Mode” pour accéder au sous-menu de réglage “SYS”.
x Les réglages du système apparaissent comme ci-dessous : (Date d’enregistrement) (Fond lumineux) Réglez la date et l’heure des fichiers enregistrés. Réglez le temps de fond lumineux. (Langue) (Arrêt) (Mode de répétition) (Contraste) (Mode Online) (Info de mémoire) (Version microprogramme) (Mise à jour des microprogrammes) (Quitter) Réglez la langue. x Réglez le temps d’arrêt automatique. Réglez le mode de répétition.
3. Appuyez sur “VOL+” (VOL-) pour sélectionner la date et l’heure. 4. Appuyez sur pour augmenter et sur pour diminuer. 5. Après avoir ajuster la date, appuyez sur “Mode” pour confirmer. ż Régler le “ Fond lumineux ” 1. accéder au menu de réglage 2. Appuyez sur pour du système sélectionner le temps de fond d’écran” 3. Appuyez sur “Mode” pour 4. Appuyez sur “ / ” accéder aux réglages, comme ci-dessous: pour régler l’heure. 5. Appuyez sur “Mode” pour confirmer et sortir. ż Régler la “Langue”.
ż “Info de mémoire” Affiche le pourcentage du disque utilisé et disponible. ż “ Version microprogramme ”. Affiche la version microprogramme en cours. ż “ Mise à jour des microprogrammes ”. N’utilisez ce réglage que si vous voulez améliorer vos microprogrammes. Appuyez sur “Mode” pour confirmer, puis sur “Lecture/Pause” pour sortir du sous-menu. x Utiliser le lecteur MP3 comme clé USB Ce lecteur MP3 peut être utilise comme clé USB.
3. un fichier est téléchargé x Mise à jour des microprogrammes du lecteur MP3 Votre lecteur MP3 peut être amélioré grâce au logiciel fourni. Suivez les instructions ci-dessous pour améliorer le microprogramme du lecteur MP3 : 1. Accédez au menu principal 2. Appuyez sur pour choisir “Réglage du système” 3. Appuyez sur “Mode” pour accéder au sous-menu du “Réglage du système”. 4. Appuyez sur pour choisir “ Mise à jour du microprogramme ”, puis sur “Mode” pour accéder au sous-menu. 5.
8. Sélectionnez le fichier de microprogramme 9. Appuyez sur “commencer la mise à jour” pour mettre à jour le lecteur.
Si la mise à jour est réussie, le lecteur affichera les icônes ci-dessous: La mise à jour du microprogramme sert à améliorer le lecteur MP3. Cependant il n’est pas nécessaire de le faire, le MP3 fonctionnera normalement même sans mise à jour. Une mise à jour du microprogramme incorrecte peut endommager votre lecteur MP3! Avant toute mise à jour, veuillez lire attentivement les instructions. Assurez-vous que le fichier téléchargé correspond à votre modèle de lecteur MP3.
AUTRES REGLAGES 1. Le lecteur doit être arrêté en mode 2. Appuyez sur “Mode” musical (ci-dessous), en cours accéder au menu suivant. d’enregistrement ou de lecture. 3. Appuyez de nouveau sur “Mode” pour 4. Appuyez sur “ accéder au choix de catalogues choisir le catalogue / pour ” pour 5. Appuyez sur “Mode” pour confirmer Note: Vous pouvez régler différents catalogues pour le “Mode musical”, “Mode d’enregistrement” et “Mode de lecture”.
3. Appuyez sur “ / ” pour choisir “fichier unique” ou “Tous les fichiers”. 5. Appuyez sur “YES” pour changer “NO” en 4. Appuyez sur “Mode” pour accéder à l’écran ci-dessous: 6. Appuyez confirmer sur “Mode” pour Le choix “effacer tout” effacera tous les fichiers du dossier sélectionné dans le mode sélectionné (ex.
retirer la clé en toute sécurité avant d’enlever votre lecteur MP3 de la prise USB. Sinon, certaines données seront détériorées. x Mode de répétition (sous-menu de lecture) Lors de la lecture de fichiers musicaux et enregistrés il est possible de choisir un mode de lecture spécial (ex. répétition, aléatoire, etc.
de lectures. (Rapide ou ralentie), Le volume ne change pas. 1. En cours de lecture, appuyez sur “Mode” pour accéder au menu. 2. Appuyez sur pour sélectionner le menu “Vitesse de lecture”. 3. Appuyez sur “Mode” pour accéder au sous menu de “Vitesse de lecture”. 4. Appuyez sur pour accélérer ou sur pour ralentir. Note: La vitesse de lecture sera sauvegardée dans le lecteur MP3 et ne changera pas jusqu'au prochain réglage.
Le MP3 commence alors à répéter la lecture du point A au point B. Une fois le segment répété un certain nombre de fois (Ce nombre peut être préréglé), la lecture s’arrêtera. En mode de répétition, il est possible de renouveler le réglage du point A et B. Lors du mode de répétition, appuyez sur VOL+ ou VOL- pour régler la vitesse de lecture. ż Fonction de comparaison (Cette fonction n’est disponible qu’en cours de lecture).
1.Après avoir accédé au mode de comparaison, l’icône “ ” s’affichera, puis le lecteur MP3 lira le fichier d’origine. Appuyez sur 2. Une fois la lecture terminée, l’icône devient “ ” et le lecteur lira votre enregistrement. pour revenir en arrière. En mode de comparaison, appuyez sur Mode pour sortir du mode de répétition. R Nombre de répétitions Cf. Réglage du système du fond lumineux. R Intervalle de répétition Cf. Réglage du système du fond lumineux.
4. Vous pouvez sélectionner la taille de la partie cryptée du disque, puis appuyez sur “démarrer”. 5. Appuyez sur “OK” puis redémarrez votre ordinateur. 6. Une fois l’ordinateur redémarré, deux symboles de disques amovibles apparaîtront à l’écran. (Cf. commentaire concernant les systèmes précédant Windows 2000 SP4). Choisissez le disque crypté, vous n’y verrez que trois fichiers (dont deux cachés), L’un d’entre eux doit être un fichier .exe. La taille du disque apparaîtra comme seulement 300Kb. 7.
. 8. A chaque branchement du MP3, il vous faudra ré-entrer votre nom et mot de passe afin d’avoir accès aux fichiers cryptés. Note: Si vous voulez crypter l disque de la manière décrite ci dessus, veuillez sauvegarder vos fichiers. Toutes les données seront perdues après le cryptage. Attention: N’oubliez pas votre nom et mot de passe sous peine de ne plus pouvoir avoir accès au disque.
Résolutions de problèmes Pas de tension Pas de musique écouteurs Langue incorrecte Vérifiez les piles Vérifiez l’interrupteur marche/arrêt dans les 1. Vérifiez le volume sonore 2. Vérifiez la connexion (de la prise des ecouteurs) 3. Vérifiez que le fichier musical est compatible MP3 Réglez la langue correcte La musique ne se télécharge pas 1. Vérifiez la connexion du câble USB 2. Vérifiez que le pilote est installé (en dessous de Windows 98) 3.
FICHE TECHNIQUE Dimensions Extérieures Poids Espace d’affichage Interface de l’ordinateur Mémoire Durée des piles Enregistrement 31mm×70mm×17mm 25g (sans piles) Fond lumineux LCD (128×32) USB1.1 haut débit (Lis1000KB, Ecris 800KB) Mémoire Flash: 128M – 1GB 10 heures de lecture max.
Ce logo apposé sur le produit signifie qu’il s’agit d’un appareil dont le traitement en tant que déchet rentre dans le cadre de la directive 2002/96/CE du 27 janvier 2003, relative aux déchets d’équipements électriques et électroniques (DEEE). - La présence de substances dangereuses dans les équipements électriques et électroniques peut avoir des effets potentiels sur l’environnement et la santé humaine dans le cycle de retraitement de ce produit.
LECTEUR MOBILITY CLASSIC MP3 www.amarina.
Security Advice 1 Do not use any liquid or aerosol products. Clean with a damp cloth. 2 Never use the device near water. 3 Ensure that no furniture or any other object is touching the cord. 4 All repairs must be carried out by qualified technicians. 5 Follow the installation instructions provided by the manufacturer. Warranty conditions x AMARINA products are sold with a 12-month factory guarantee dating from the time of purchase.
TABLE OF CONTENTS FEATURES SUMMARY ................................................................................. 4 INTRODUCTION ............................................................................................. 5 x Buttons and controls definition .......................................................... 5 x Display screen ................................................................................. 6 x Battery indicator ..................................................................
OTHER SETTINGS …………………………………......................................... 20 x Select different directory ……………................................................... 20 x Delete file .......................................................................................... 20 x Repeat Mode (Playback submenu) ................................................. 22 x Play speed ………………................................................................... 22 x Repeat Mode ....................................................
This product represents a new generation of MP3 players supporting MP1, MP2, MP3, WMA, WAV. FEATURES SUMMARY Ɣ Compact size. Ɣ Supports virtually all music file formats such as: MP1,MP2,MP3,WMA, Ɣ Supports firmware update. Ɣ Supports FM radio. Using Auto-search or manual search, the player can save up to 40 different radio stations. The frequency varies from 87Khz to 108Khz. Ɣ No need to have any driver for Windows 2000 or above.
INTRODUCTION Congratulations on purchasing of this MP3 player! Before starting to use it please, read this manual carefully. Due to the constant production improvement, the MP3 Player you have purchased might be slightly different from the one described in this manual. x Buttons and controls definition - Express Forward; - Express Backward; - Play/Pause 1� “Play/Pause”: Power ON/PLAY/STOP/OFF. 2� “Mode”: General confirmation button. 3� “VOL+”: Increase volume. Speed up. 4� “VOL–”: Decrease volume.
x Display screen x Battery indicator Displays the battery current charging status. When the battery is fully charged it will be displayed as on the picture (black square). When the battery is low the square will became empty. MAIN FUNCTIONS x Enter the Menu Press “Mode” button to enter the menu. There is the main menu and lots of submenus.
o Recording playback mode screen: o FM mode screen: o System settings screen: o Connection with PC screen: x Volume adjustment Press “VOL+” to increase the volume. Press “VOL–” to decrease the volume. x Power ON/OFF x Press and hold “Play/Pause” button to turn the Mp3 player on. While the MP3 is playing, press and hold the “Play/Pause” to turn the MP3 player off.
In the Music mode press the “Play/Pause” button to playback the music. x Record/Pause In the Record mode press this button to start or stop recording, press the button for more than 2 seconds (long time press) to stop the recording. In any mode press the “Mode” button for 2 seconds (long time press) to enter the main menu. x Music playback Please, follow the steps below 1. Connect your earphone to the earphone jack of the MP3 player. 2.
If the song name is: Love.mp3 Then the song text file should be: Love.lrc o How to make sure the MP3 player has recognized the .LRC file with the song text? The icon in the left corner of the screen during the music playback will look like the song has the text, otherwise the icon will look like “ ”. Below is the example of the screen with the song text: x Voice recording The MP3 player can save up to 99 recorded files in its memory. R Recording 1. Enter the Main menu: 2.
If you get the message “Disk full” on the screen, that means there is not enough space to save the recorded file, you should delete the file to get the space. If you get the message “Directory full” on the screen, that means that the recorded files quantity exceeded 99, you should save the recorded file to another directory. During the recording, only the “Play/Pause” button can be used. R Select recording type 1. Enter the Record submenu pressing the “Mode” button 2.
R Playback the recorded file 1. Enter the main menu. button until you select “RPL” 2. Press the 3. Press the “Mode” button to enter the submenu. 4. Press the “Play” button to start the playback. 5. Press “ / ” to select the recorded file. 6. Volume control VOL+ : Increase volume VOL� :Decrease volume x File recorded in .ACT format can be converted to .WAV Use the supplied utility software to convert the recorded .ACT file to the .WAV file. 1. Run the “Sound Converter” software utility.
2. Select the recorded file. 3 .Click “Convert” to create .WAV file.
You can also convert the .WAV file to MP3 format using the same utility. FM Radio To use the FM radio please, follow the steps below: 1. Enter the main menu 2. Press the button until you select “FM” 3. Press the “Mode” button to enter the “FM” menu. 4.
Press the “Mode” button to save this radio station. 7. To choose the previously saved radio station Press the “Play/Pause” button to select and listen to the saved radio station. 8. Volume Control Press Vol+ or Vol- to increase or decrease the volume. : You can save up to 20 radio stations in your MP3 player. : To delete the radio station please refer to the section Delete file below. SYSTEM SETTINGS x How to change the System settings 1. Enter the main menu 2. Press the button to select “SYS” 3.
(Contrast) (Online Mode) (Memory Info) (Firmware Version) (Firmware Update) (Exit) x Sets the Contrast of your LCD Sets the function of the MP3 removable disk Checks capacity of the flash memory Displays the date of the current firmware version Use this setting for the firmware update Exit the submenu System settings explanation ż Setting “Record Time” 1. The screen will look as shown below: 2. Press the “Mode” button to enter the submenu. The screen will look as shown below: 3.
1.Enter the system settings menu 2. Press the button to select ”Back time” 3. Press “Mode” enter the setting 4. Press “ / ” buttons to as shown below: set the time. 5. Press the “Mode” button to confirm and exit. ż Setting “Language”. Please, operate in a similar fashion as the “Back time” setting. ż Setting “Power off“. The same as the “Back time”.
x Use MP3 player as a USB Disk This MP3 player can be used as a USB disk. There is no need to install any driver (with exception of Windows 98) under Windows 2000/XP, Mac OS 10.3 or above, Linux Reshat 8.0 or above. The MP3 player can use the USB port power, so when it is connected to the PC the battery is not used. If you want to playback the music when MP3 player is connected to the computer, during the “wait mode” press the “Mode” button, then you will enter the main menu.
1. Enter the main menu 2. Press the button to select “Sys Set” 3. Press the “Mode” button to enter the “Sys Set” submenu. 4. Press the button to select the “firmware update”, then press the “Mode” button to enter the submenu. 5. Connect your MP3 player to PC. 6. Run“MP3 Player Update” utility 8. Select the new firmware file (you can download it from the www.gembird.
9. Click the “Begin Upgrading” button to update the player.
Firmware update is to improve the mp3 player, however it is not necessary to do that, your MP3 player will work normally without any update. Firmware update used in a wrong way might damage your MP3 player! Before updating please, read the instruction carefully. Make sure that the uploaded file does correspond to your model of the MP3 player. The person performing update is supposed to have some experience in working with computers.
3. Press the “Mode” button again to 4. Press the “ / ” button enter the directory choice to select the desired directory 5. Press the “Mode” button to confirm the choice Note: You can set different directories for “Music Mode”, “Record Mode” and “Playback Mode”. x Delete file In “Music Mode”, “Record Mode”, “Playback Mode” you can delete files and the Radio stations. To do that, follow the steps below: 1. The MP3 should be stopped.(In all modes 2.
5. Press the button to change “NO” to 6. Press “Mode” button to confirm the choice “YES” The choice “Delete All” will delete all the files in the selected directory for the chosen mode (e.g. if the MP3 is in the “Music mode” it will delete all the music files, but not the other ones, such as recorded files) If you prefer to delete the files from your PC when MP3 is connected to the USB port, make sure you use the Safely Remove Device wizard of Windows before you unplug the MP3 player from the USB port.
(Repeat One) (Folder) (Repeat Folder) (Repeat All) ż ż SHUFFLE (Random) Play the songs at random (INTRO) (Preview,Intro) x Repeat one song. Play all the songs in this folder Repeat all the songs in the same folder Repeat all the songs in the MP3 player Play 10 first seconds of each song in the current folder Playback speed During the music playback (only for the MP3 file), it is possible to choose different playback speed (speed up or slow down), the volume will not change. 1.
R A-B Repeat Using this function it is possible to mark the music fragment for subsequent playback. To do that, please follow the steps below: 1. During the music or recorded file playback press the “Mode” button to enter the submenu. 2. Press the button to select the “repeat mode” submenu. 3. Press the “Mode” button to enter the “repeat mode”. You will see the icon “A” will blink. 4. Press the ” button to confirm the point A. On the icon and the letter the letter “B” will now start blinking. 5.
1. The player should be in the A-B 2. Press the button to enter the segment repeat mode “Repeat Mode”. 4. After recording is finished, the MP3 player will first play the original 3. The repeat icon“ ”will change to the MP3 file. The icon on the screen will following icon“ ”. Now the MP3 player change to “ ”. Press the button will record the voice, the recording time is the same as the playback time from the to listen to your recorded file and to point A to the point B. enter the compare mode.
Please refer to the “backlight time” system setting. Repeat interval is the time between two consequent playbacks in the repeat mode (the unit is set in seconds). IMPORTANT! Disk encryption function IMPORTANT! With the supplied utility you can divide the MP3 player into two sections (public and encrypted). Under Windows 2000 SP4 and above you will see 2 disks in this case. Under older operating systems only one removable disk will be seen on your computer.
4. You can select the size of the encrypted part of the disk, then press the “Start” button 5. Press “OK” and then restart your computer. 6. After computer finishes the reboot, you will see two removable disks on your computer (see the comments above about the operating systems before Windows 2000 SP4). Choose the encrypted disk, you will see only three files there (two of which will be hidden), one of them is the .exe file, the size of the disk will appear to be only 300Kb. 7. Run the “RdiskDecrypt.
. 8. Now whenever you connect your MP3 player to the computer, you won’t be able to use it until you enter the user name and the password. Note: If you want to encrypt the disk in the way described above, please, first backup your files, all the data will be lost after the encryption. Warning: Don‘t forget your password and the user name, otherwise you won’t be able to use your disk. In case the password is lost, you can only format the disk to regain the access, but then all your files will be lost.
TROUBLESHOOTING No power Check battery Check your power switch No music is heard in 1. Check the Volume level 2. Check the connection (earphone to the the earphones earphone jack) 3. Check if the music file can be played by the MP3 player. Wrong language Set correct language Can‘t download music 1. Check if the USB cable properly connected to your computer 2. Check if you have installed the driver (under Windows 98) 3.
SPECIFICATIONS Outside Dimensions Weight Display area Computer interface Memory Battery lifetime Recording MP3,WMA,WMV,ASF Music formats supported Temperature range Language support Operating system 31mm×70mm×17mm 25g (not including battery) Lattice (128×32) EL Backlight High speed USB2.0 Flash memory: 128M - 1GB Playback up to 10 hours.