NSW-R4 USER MANUAL HANDBUCH HANDLEIDING MANUEL DESCRIPTIF РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ КЕРІВНИЦТВО КОРИСТУВАЧА WIRELESS BROADBAND ROUTER, 300 M WLAN BREITBAND ROUTER, 300 M DRAADLOZE BREEDBAND ROUTER, 300M ROUTEUR SANS FIL, 300M БЕСПРОВОДНОЙ МАРШРУТИЗАТОР, СКОРОСТЬ ДО 300 МБИТ/С БЕЗДРОТОВИЙ МАРШРУТИЗАТОР, ШВИДКІСТЬ ДО 300 МБІТ / С
NSW-R4 WIRELESS BROADBAND ROUTER, 300M Features Wireless 300M router with 4-port 10/100Mbps LAN switch and 802.11n access point Supports all IEEE802.11b/g/n WiFi standards Up to 300 Mbps data transfer rate via the wireless 802.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M 1. Wireless router overview 1.1 Front panel (LED indicators) SYS (Red): Flickering light indicates a proper connection to the power supply. WPS (Green): The LED is flash about two minutes during WPS working. WLAN (Green): The LED is flickering during wireless activity. LAN 1, 2, 3, 4(Green): The Link/Act LED serves two purposes. If the LED is continuously illuminated, the Router is successfully connected to a device through the corresponding port.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M 1.2 Back panel (sockets description) WAN: 10/100Mbps RJ45 port. The WAN port is where you will connect Cable/DSL Modem or other LAN. LAN (1, 2, 3, 4): 10/100Mbps RJ45 Auto-sensing. These four LAN ports are where you will connect networked devices, such as PCs, print servers, remote hard drives, and anything else you want to put on your network.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M 2 Hardware Installation 1. Make sure that all devices including your PCs, modem and router are powered off. 2. Connect your Internet access device such as cable or DSL modem to the router WAN port using a cat 5e patch cord. GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M 3. Turn all the devices on. 4. Power the router up. 3 Quick Installation Guide 3.1 TCP/IP Settings Before you can access and configure router, you have to setup your PC network adapter IP address. Connect your PC to the router LAN port. Follow the steps below to access the built-in router web-interface (for Windows OS). Note: The router default IP address is: 192.168.1.1 1. Choose Network connections from the Control Panel. 2.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M 3.2 Getting Started To access the router web-interface, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.1.1). You will be prompted to enter the login and password. The default Login/Password is: admin/admin Upon a successful login you will see the status page. GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M 3.3 Setup Wizard GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M Click on the “Wizard” option to setup your router step by step in a simple way. There are six steps to follow: Please follow the steps to complete the router configuration. GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M Step 1 – Operation Mode Settings The router supports three operation modes: Gateway, Bridge and Wireless ISP. Each mode is suitable for different purpose, please choose the correct mode. GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M Step 2 – Time Zone Settings The Time Configuration option allows you to configure, update, and maintain the correct time for the internal system clock. Daylight Saving can also be configured to automatically adjust the time when needed. NTP client update: Check this box to connect to the NTP Server and synchronize Internet time. Automatically Adjust Daylight Saving: If you check this box the system will take the summer time into consideration.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M Step 3 – LAN Settings Setup the IP address and network mask for the LAN interface. Step 4 – WAN Settings The router supports five access modes for the WAN, please choose the correct mode according to your Internet Service Provider (ISP). Mode 1: DHCP Client GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M Select DHCP Client to obtain IP Address automatically from your ISP. This mode is commonly used for Cable modem services. Mode 2: Static IP Select Static IP Address if the IP information is provided to you by your ISP. You will need to enter the IP address, subnet mask, gateway address, and DNS address (-es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x).
NSW-R4 WIRELESS BROADBAND ROUTER, 300M Subnet Mask: Enter the Subnet Mask assigned by your ISP. Default Gateway: Enter the Gateway assigned by your ISP. DNS: The DNS server information will be supplied by your ISP (Internet Service Provider.) Mode 3: PPPoE GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. User Name: Enter your PPPoE user name. Password: Enter your PPPoE password. Mode 4: PPTP Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with IP information and PPTP GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M Server IP Address, of course it also includes a username and password. This mode is typically used for DSL services. IP Address: Enter the IP address. Subnet Mask: Enter the subnet Mask. Server IP Address: Enter the PPTP Server IP address provided by your ISP. GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M User Name: Enter your PPTP username. Password: Enter your PPTP password. Mode 5 L2TP Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and password. IP Address: Enter the IP address. GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M Subnet Mask: Enter the subnet Mask. Server IP Address: Enter the PPTP Server IP address provided by your ISP. User Name: Enter your PPTP username. Password: Enter your PPTP password. Step 5 – WLAN Settings GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M Wireless Interface: If you do not want to use the wireless interface, uncheck the box to disable all the wireless functions. Band: Supported 802.11B, 802.11G, 802.11N and mixed. Mode: Supported AP, Client, WDS and AP+WDS mode. Network TYPE: This type is only valid in client mode. SSID: Service Set Identifier, external name of your wireless network. Channel width: Select 40MHz if you use 802.11n or 802.11n mixed mode, otherwise 20MHz, it is default value.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M Key length: WEP supports 64-bit or 128-bit security key. Key Format: The key can be entered in ASCII (as symbols) or Hex (hexadecimal) format. Key Setting: Enter the key as ASCII or Hex. The following picture shows how to set the WPA-PSK security; you can also select WPA (TKIP), WPA2 (AES) and Mixed mode. GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M Pre-Shared Key Format: Specify the format of the key, pass phrase or hex. Pre-Shared Key: Enter the key here (phrase or hexadecimal). 4 Advanced Setup 4.1 Wireless Advanced setup 4.1.1 WPS WPS is designed to set up the password-protected Wi-Fi networks and to simplify the network management. This router supports WPS features for AP mode (access point), AP+WDS mode, Infrastructure-Client mode, and the wireless root interface of Universal Repeater mode.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M WPS: Checking this box and clicking “OK” will disable the WPS function. WPS is turned on by default. WPS Status: After you set up all security settings the checkbox “Configured” will be highlighted Self-PIN Number: It is AP’s PIN number. Start PBC: Clicking this button will invoke the Pus Button Configuration of WPS. If one station wants to connect to the AP, it must click its PBC button within two minutes. You will see the reset LED flashing during this time.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M 4.1.2 Access Control The Wireless MAC Address Filtering feature allows you to control which wireless stations are allowed to be connected to the router. Mode: If you choose 'Allowed Listed', only those clients whose wireless MAC addresses are in the access control list will be able to connect to your Access Point. When 'Deny Listed' is selected, these wireless clients on the list will not be able to connect the Access Point. The MAC Address format is 001122334455. 4.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M WDS: Check this box to enable the WDS function. MAC Address: Enter the remote AP MAC address. Security: Sets the WDS security settings. Encryption: You may select WEP 64bits, WEP 128bits, WPA (TKIP), WPA (AES). WEP Key Format: You may select ASCII Characters or Hexadecimal Digits (in the "A-F", "a-f" and "0-9" range) to be the WEP Key. WEP Key: Set key to encrypt your data Pre-Shared Key Format: You can select PASSPHRASE or HEX(64 CHARACTERS).
NSW-R4 WIRELESS BROADBAND ROUTER, 300M If you configure the router as Virtual Server, remote users accessing services such as Web or FTP at your local site via public IP addresses can be automatically redirected to the local servers with private IP addresses. In other words, depending on the requested service (TCP/UDP port number), the router redirects the external service request to the appropriate server. Status: Clicking this box will enable the Port Forwarding function.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M 4.2.2 Trigger Port Some applications (like Internet games, video conferencing, Internet calling and so on) require multiple connections. These applications cannot work with a pure NAT router. Port Triggering is used for some of these applications to let them work with a NAT router. Status: Check on to enable this function. Trigger Port Range: The port for outgoing traffic. An outgoing connection using this port will “Trigger” this rule.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M Incoming Port Range: The port or port range used by the remote system when it responds to the outgoing request. A response using one of these ports will be forwarded to the PC that triggered this rule. Incoming Protocol: The Protocol used for Incoming Ports Ranges, either TCP or UDP, or both. Comment: You can add some comments for this item. 4.2.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M UPnP devices can be automatically discovered by the UPnP service application on the LAN. UPnP: Check to enable UPnP function Note: The list will contain the forwarding port added by the UPnP Service. 4.3 Security Setup The router provides extensive firewall settings to limit the risk of intrusion and protect your computer from hacker attacks. 4.3.1 Security The firewall will allow or block some services according to the following settings. GEMBIRD EUROPE B.V.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M Ping Access on WAN: allows or blocks the Ping WAN interface. IGMP Proxy: IGMPproxy is a simple dynamic Multicast Routing Daemon using only IGMP signaling. It's intended for simple forwarding of Multicast traffic between networks. Web Server Access on WAN: allow or blocks access to the Web Server from WAN interface. VPN pass through: allows or blocks the VPN Pass through the router NAT. 4.3.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M dropped according to the rule. If no rule matching the packet is found, then the firewall will let it go to the destination. Note 2: If you set the date and time in your rule then the NTP client has to be enabled. Note 3: Click “Add” button to add this rule to the table and click “OK” to make it effective. You also can edit or delete the records: 1. IP Filter Allow or block the computers according to their IP addresses. 2. MAC filter GEMBIRD EUROPE B.V. http://www.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M Allow or block the computers according to their MAC addresses. 3. URL filter You can block some URLs using the URL Key string. If Source IP or MAC address fields are blank, then all computers can not access this URL, otherwise the rule only applies to the computer with the given IP or MAC address. Example 1: block “abc.com”, “abc.net” or “www.abc.com” to all computers. GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M Example 2: block “abc.com”, “abc.net” or “www.abc.com” for the computer with 192.168.1.101 IP address. GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M Example 3: allow to access “abc.com”, “abc.net” or “www.abc.com” for all computers from 09:00 to 18:00 during the working days only. GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M 4. Port filter You can limit some or all computers to access a certain destination IP and/or port. Example 1: block all computers to access port 21. GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M Example 2: block the computer with IP address 192.168.1.101 to access port 21. GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M 4.3.3 DoS With settings on this page you can block the DoS attack. GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M 4.4 QoS Setup The QoS helps improving your network gaming performance by setting priorities for applications. By default the bandwidth control is disabled and the application priority is not specified. In order to complete these settings, please follow the steps below. Enable this function. Enter the total speed or choose automatic mode. Enter the IP address of the user which you’d like to control.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M 4.5 Router Setup A static route is a pre-determined pathway that the network information should travel to reach a specific host or network. GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M Static Route: Click this box to enable the static route. IP Address: The network or host IP address wished to be accessed. Subnet Mask: The subnet mask of the destination IP. Default Gateway: the router or host IP address where the network packet was originally sent. It must be on the same network segment with the WAN or LAN port. Routing Table: Clicking the Show button will let you see the whole routing table.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M 4.6 System 4.6.1 Upgrade Firmware You can upgrade the Firmware by selecting the file and pressing the button “upload”. 4.6.2 Save/Load Config Here you can backup or restore the whole system configuration. GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M Save to File: Get the router’s settings and store it on your local computer. Load from File: Restore the settings from the file you saved before. Restore to factory: Restore the system settings to the factory default. 4.6.3 Rebooting the device You can reboot the device by clicking on the Reboot button. 4.6.4 Setting Password To ensure the Router’s security it is recommended to change the login and password after the first login. GEMBIRD EUROPE B.V. http://www.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M GEMBIRD EUROPE B.V. http://www.gembird.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M Waste disposal: Entsorgungshinweise: Do not deposit this equipment with the household waste. Improper disposal can harm both the environment and human health. For Information about waste collection facilities for used electrical and electronic devices, please contact your city council or an authorized company for the disposal of electrical and electronic equipment. Werfen Sie dieses Gerät nicht in den Hausmüll.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M WARRANTY CONDITIONS The warranty period is 36 months and begins with the sale to the end user. The receipt must clearly list the date of purchase and the part number, in addition it should be printed. Keep the receipt for the entire warranty period since it is required for all warranty claims. During the warranty period the defective items will be credited, repaired or replaced at the manufacturer's expense.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M GARANTIE VOORWAARDEN CONDITIONS DE GARANTIE De garantietermijn bedraagt 36 maanden en gaat in op de aankoopdatum van het product door de eindgebruiker. Op de aankoopbon moeten de aankoopdatum en productomschrijving duidelijk vermeld staan. Gelieve de aankoopbon de gehele garantieperiode te bewaren, deze is ten alle tijden benodigd voor alle garantie aanspraken. Tijdens de garantieperiode zullen alle gebreken verholpen of vervangen worden door de fabrikant d.m.v.
NSW-R4 WIRELESS BROADBAND ROUTER, 300M ГАРАНТИЙНЫЙ ТАЛОН УМОВИ ГАРАНТІЙНОГО ОБСЛУГОВУВАННЯ 1. Гарантийное обслуживание предоставляется в течение срока гарантии, при наличии правильно и четко заполненного гарантийного талона, и изделия в полной комплектации. Серийный номер и модель изделия должны соответствовать указанным в гарантийном талоне. 2. Гарантийное обслуживание представляет собой бесплатное устранение всех неполадок (ремонт), или замену изделия на новое (аналогичное). 3.
