Operation Manual

8
GEMBIRD EUROPE B.V. http://www.gembird.eu
STR-SHOCKFORCE-
M
Special Functional Buttons KeyMap Function
Button Programming (not available in NEGCON mode)
Program source button: ○/1, ○/ 2, X/ 3, ○/ 4, R1/ 6, R2/ 8, L1/ 5, L2/ 7
Programmed button: gas pedal, brake pedal, Gear lever (L2, R2)
Program setup
• Press SELECT/9 and START/10 at the same time. Hold for 3 seconds
until Program LED turns green
• Press the programmed button and Program LED starts blinking.
• Press program source button. Program LED is off. Button is now
programmed.
Clear single program
• Press SELECT/9 and START/10 at the same time. Hold for 3 seconds
until Program LED turns green
• Press programmed button and Program LED start blinking.
• Press programmed button again and Program LED is off. Single
programmed button is cleared.