Operation Manual

GEMBIRD EUROPE B.V. http://www.gembird.eu

STR-SHOCKFORCE-

Clear all programs

• Press SELECT/9 and START/10 at the same time. Hold for 3 second

and Program LED turns green. Release the button.

• Press START/9 and hold for 4 seconds. Program LED is off. All

programmed buttons are cleared. Default is restored.

Note: All the settings will be cleared when the wheel power is

cut off.

Wheel sensitivity adjustment (3 levels)

• Press SELECT/9 and START/10 at the same time. Hold for 3 seconds

until Program LED turns green.

• Press SELECT/9 again. Current sensitivity is displayed

• Press SELECT/9 a third time to select a sensitivity level. It cycles as

below:

- Middle (Program LED flashes)

- High (Program LED flashes quickly)

- Low (Program LED flashes slowly)

• Press UP of the D-PAD to confirm and quit