Installation Instructions

B: Manual setup of the repeater
This manual describes the steps you have to follow to setup your Gembird WNP-RP-002 WiFi-
repeater.
Follow below steps to setup your repeater:
1. Plug in the repeater in an available power outlet socket. Wait for about 1 minute until the
repeater is booted up.
2.
Click on the network icon ( of ) in the Windows taskbar to view the available wireless
networks.
3.
The repeater network will be in this list, SSID is WiFi-Repeater.
4. Select the “WiFi-Repeater” network (click on it) and choose “Connect” and wait for some
seconds.