Installation Instructions

Name current network/router
You
r
route
r
p
assword
13.
The name (SSID) of your current network/router will now be visible in the “Network name”
field. Below you are asked to enter the password of your network. NOTE, this is case
sensitive!
You do not have to change anything from the pre-entered settings. In above example you
only have to check if all settings are correct and enter the pre-shared key (the password).
14. Technically, the device is now ready for use. However, you do have the optional possibility to
change the name (SSID) and password of the repeater network (3). This will influence the
network name that will be visible on your Phone, tablet or PC. By unchecking the “Auto setup”
checkbox, you can choose any name and password you prefer. E.g. it is possible to give your
repeater exactly the same name and password as your existing router, so all you equipment
can switch between the repeater and router seamlessly.
15. If you have setup everything according to your preferences, press “Save/Apply” .