Operation Manual

GEMBIRD EUROPE B.V. http://www.gembird.eu

All brands and logos are registered trademarks of their respective owners

WNP-UA300P-01

HIGH POWER USB WIFI ADAPTER

(ad hoc)

network

Channel

Select wireless channel for ad hoc connection. This option only appears

when you’re using ad hoc connection.

Network

Authentication

Select the network authentication type from drop-down menu. This setting

must be identical with the setting of wireless access point you with to

connect.

Data

encryption

Select the data encryption type from drop-down menu. This setting must be

identical with the setting of wireless access point you with to connect.

ASCII /

PASSPHRASE

When the encryption type is ‘WEP’, it’s required to input a set of

‘passphrase’ to connect to wireless access point. Check ‘ASCII’ or

‘PASSPHRASE’ depends on the security setting of access point, and input it

in the box; if you select ‘PASSPHRASE’ you also need to select the length

of the key.

The passphrase must be identical with the setting of wireless access point

you with to connect.

Key index

Select WEP key index. For most of access points you can select ‘1’, but

please refer to the setting of the access point.

Network key /

Confirm

network key

When the encryption type is ‘WPA’ or ‘WPA2-PSK’, it’s required to input a

set of ‘passphrase’ to connect to wireless access point. Please input the

same passphrase in two boxes for confirmation.

EAP TYPE /

Tunnel /

Provision

Mode

When authentication type is any of 802.1X, you have to select EAP type,

tunnel, and provision mode from dropdown menu. This setting must be

identical with your 802.1x authentication server.