User Manual

mdj-500 manual geminisound.com
14
USE STORAGE DEVICE ERRORS
Some USB devices may not operate properly with the MDJ-500.
Gemini accepts no responsibility for any possible data loss that
may occur. To ensure that data is not permanently lost, please
make sure to backup any data prior to connecting the USB
device to the unit.
- USB hubs cannot be used with the MDJ-500.
- If the unit does not read the USB storage device, first check
to see if the drive was inserted completely.
- If a “ERR E-1006 Too many devices” message appears, it is
because a USB hub is in use. The MDJ-500 does not work with
USB hubs. Disconnect the USB hub and connect the USB
storage device directly into the MDJ-500.
-If a” ERR E-1003 Media error” message appears, this signifies
that your USB storage device is formatted incorrectly.
- If you receive any of the following errors, please contact
Technical Support…
ERR E-1001 Bad Update
ERR E-1004 Unsupported file format
ERR E-1007 Incorrect processing
MIDI ERRORS
-If the computer does not recognize the device, try powering the
unit o and rebooting the computer.
-If the DJ software does not list the device, ensure that you are
using the latest version by downloading any updates to your DJ
software. If the MDJ-500 mapping does not appear in your DJ
software’s list, go to geminisound.com for downloads and support.
GENERAL TROUBLESHOOTING
Make sure your MDJ-500 is running the latest firmware! Visit
www.geminisound.com to download and run the Gemini Updater
software
GENERAL
Type............................................…..USB media player w/ MIDI and HID
USB output type.................................................................................Type B
Power Supply......................................................AC 100/240V, 60/50 Hz
Power consumption................................................................................10W
Dimensions............................................................13.125 x 12 x 4.5 inches
(333 3/8 x 304 x 114.3 mm)
Weight................................................................................... 7.2 lbs. (3.3 kg)
ANALOG AUDIO
Frequency Response.....................................................20 Hz to 20 kHz
Total Harmonic Distortion.............................................Less Than 0.05%
Signal to Noise Ratio......................................................................< 100dB
Dynamic Range............................................................................... > 100dB
Output Level....................................................................1.0 +/- 0.2V R.M.S.
USB AUDIO
Bit Depth....................................................................................24-bit, 16-bit
Sampling rate........................................192kHz, 96kHz, 48kHz, 44.1kHz
SPECIFICATIONS AND DESIGN ARE SUBJECT TO
CHANGE WITHOUT NOTICE FOR PURPOSE OF
IMPROVEMENT.
TROUBLESHOOTING / SPECIFICATIONS
TROUBLESHOOTING SPECIFICATIONS