User Manual

mdj-500 manual • geminisound.com
6
LINE OUTPUT
Plug one end of the included RCA cable into the
LINE OUTPUT JACK (D) on the rear panel.
Plug the other end of the RCA connectors into any
available line input jacks on your mixer.
If you are connecting the MDJ-500 through a
receiver, you can plug the RCA connectors into the
CD AUX INPUT JACKS on your receiver. If there are
no CD or AUX INPUTS use any line level (not phono)
inputs.
USB
Plug in the USB cable into the USB OUT (B) on the
rear panel. Plug the other end of the USB cable into
any available USB port on your computer. This will
enable you to use the MDJ-500 in MIDI mode

POWER
Plug the 2 prong power cable into the power input on the back of the MDJ-500 (A), and the other end into Mains power.
CONNECTING THE MDJ-500