Teknisk katalog Utdrag 1SEC800010C2101 Gemini Low voltage electric insulating switchboards
Introduction Characteristics of Gemini switchboards Gemini, something completely different in switchboards electric field to use as a molding technique. This process obtains a “sandwich” of two materials with a compact external covering and an expanded core, 1SLC805003F0001 ABB SACE’s Gemini range is revolutionizing the market of low voltage electric insulating switchboards.
Introduction Characteristics of Gemini switchboards Nothing can be compared with Gemini, even when the switchboards have reached the end of their life cycle: they are totally ecologically compatible. The material used to manufacture them is 100% recyclable. Polyester, on the other hand, cannot be recovered. Moreover, to make sure that correct disposal procedures are followed, instructions are provided about how to identify materials and what to do with the product once it has served its useful purpose.
Introduction Characteristics of Gemini switchboards A switchboard that is not just one system, but three Written in full, its name “Protect IT Multipurpose Box Gemini” says that no switchboard is more reliable.
Characteristics grunnenhet automasjon PROTECTION IP66 (IEC EN 60529) Class II insulation STRENGTH Thermoplastic material moulded in co-injection Resistance to abnormal heat and fire up to a temperature of 750 °C (IEC EN 60695-2-1) IK10 (IEC EN 50102) degree of resistance to impacts Protection against chemical and atmospheric agents (water, saline solutions, acids, basic agents, mineral oils, UV rays) Operating temperature -25 °C ÷ +100 °C Rated uninterrupted current up to 400 A Rated service voltage up
Order codes Basic configurations that protects it from accidental damage until wiring is completed and the switchboard is installed. Hole-cover plugs to guarantee IP protection and double insulation for wall mounting are also supplied with the pack together with the instruction sheet. replaced by locks of another type available in the accessories. Boxes and doors can be requested either separately or as combined “box + door” codes, to make filling out the order form more flexible.
Order codes / el.nummer Basic configurations Size Dimensions Modules Codes / el.
Order codes / el.nummer Basic configurations Size Internal dimensions Conf./Imb. External dimensions Codes Unit/Pack Single box WxHxD (mm) WxHxD (mm) 1 2 3 4 5 6 335x400x210 460x550x260 460x700x260 590x700x260 590x855x360 840x1005x360 250x300x180 375x450x230 375x600x230 500x600x230 500x750x330 750x900x330 Size Box dimensions 1SL0221A00 1SL0222A00 1SL0223A00 1SL0224A00 1SL0225A00 1SL0226A00 1/1 1/1 1/1 1/1 1/1 1/1 Codes / el.
grunnenhet automasjon distribusjon tilbehør
Order codes Components for automation applications 1SLC805015F0001 to carry out these operations. To finish the job, the inner door can be mounted (reversible and in insulating material), guaranteeing IP40 degree of protection when the switchboard door is open. No tools are needed unless the inner door is equipped with buttons, warning lights, etc.
Order codes / el.nummer Components for automation applications Size of the switchboard Code / el.nummer Unit/Pack Base plates • Available in three versions in blank or drilled metal and insulating material • Positioning at 3 different depths for size 1, 4 different depths for sizes 2-3-4 and 7 different depths for sizes 5-6 (adjustments with 30 mm pitch) • Supplied with feet and hooks adjustable at three further positions (with 7.
Order codes Components for automation applications Code Dimensions Weight (kg/m) Unit/Pack-meters Wiring ducts • • • • • 12 8 6 4 ø7 CL AC K Made in self-extinguishing thermoplastic material (UL 94 V0), resistant to abnormal heat and fire up to 960 °C (IEC 695-2-1) RAL 7035 grey color Available in version with 8/12 mm and 4/6 mm slots Base strip designed to snap onto Fix-O-Rapid Available in standard lengths of 2 m With 8/12 mm slots With 4/6 mm slots WxH (mm) 05 019 05 033 05 043 05 063 05 08
grunnenhet automasjon distribusjon tilbehør
Order codes The DIN rail is supplied with special hooks already in position for attaching to the uprights. 1SLC805024F0001 2 The depth at which the DIN rail, the modular plates, the kit for fixing the Tmax circuit breakers and the wiring duct are positioned can be adjusted with a simple sliding movement. 1SLC805022F0001 1SLC805026F0001 The frame can be extracted to make wiring operations easier at the workbench.
Order codes / el.nummer Components for distribution and mixed applications Size of the switchboard Code / el.nummer Unit/Pack Uprights • • • • Incorporated vertical wiring duct (ABB patent) Snap-on mounting of all components (installation pitch of 75 mm) Snap-on insertion into box Depth of installed components adjusted at a pitch of 12.
Order codes / el.nummer Components for distribution and mixed applications Size of the switchboard Code / el.
Order codes / el.nummer Components for distribution and mixed applications Size of the switchboard Code / el.
Order codes Components for distribution and mixed applications Size of the switchboard Code Unit/Pack Wiring kit 1SLC805039F0001 • Composed of wiring duct in versions 25x60 mm and 40x60 mm (WxH, 8-12 mm slots) and Fix-O-Rapid • Snap-on mounting on uprights with depth adjustment ABB 1 2 3 4 5 6 Wiring duct 25x60 mm Wiring duct 40x60 mm 1SL0353A00 1SL0354A00 1SL0354A00 1SL0355A00 1SL0355A00 1SL0356A00 1SL0360A00 1SL0361A00 1SL0361A00 1SL0362A00 1SL0362A00 1SL0363A00 1/4 1/4 1/4 1/4 1/4 1/4 18
grunnenhet automasjon distribusjon tilbehør
Order codes Accessories tection when the door is open in distribution and mixed configurations. 1SLC805028F0001 and pedestal make it easier to install the switchboards in any context. Three different kinds of locks are supplied for the doors with which it is possible to replace the standard double bit model. The universal drill bit can be used to open the side branch connections.
Order codes / el.nummer Accessories Code / el.
Order codes Accessories Code / el.
Order codes Rapid selection table Basic configuration F D A E B C 2 No. of No. of installable DIN modules vertical mod. (mod.
Order codes Rapid selection table Components for automation Components for distribution Inner door Base plate Uprights DIN rail Drilled panel Blank panel Drilled 1SL0259A00 1SL0275A00 1SL0267A00 - 1SL0260A00 1SL0276A00 1SL0268A00 1SL0252A00 1SL0284A00 1SL0291A00 1SL0308A00 1SL0313A00 1SL0319A00 1SL0325A00 1SL0331A00 1SL0297A00 1SL0302A00 1SL0261A00 1SL0277A00 1SL0269A00 1SL0253A00 1SL0285A00 1SL0291A00 1SL0308A00 1SL0313A00 1SL0319A00 1SL0325A00 1SL0331A00 1SL0297A00 1SL0302A00 1SL02
Technical information Technical characteristics Table of Gemini switchboards’ technical characteristics Size Gemini with transparent door 1 1SL0211A00 2 1SL0212A00 3 1SL0213A00 4 1SL0214A00 5 1SL0215A00 6 1SL0216A00 Gemini with opaque door 1SL0201A00 1SL0202A00 1SL0203A00 1SL0204A00 1SL0205A00 1SL0206A00 External dimensions WxHxD (mm) 335x400x210 Internal dimensions WxHxD (mm) 250x300x180 IP degree IP66 460x550x260 375x450x230 IP66 460x700x260 375x600x230 IP66 590x700x260 500x600x230 IP66
ABB A/S Automasjonsprodukter Jacob Borchsgt. 6 3012 Drammen Tel.: 81520915 - Telefax: 32858010 http://www.abb.no 1SEC800010C2101 UNI EN ISO 9001 Due to possible developments of standards as well as of materials, the characteristics and dimensions specified in the this document may only be considered binding after confirmation by ABB.