Operation Manual

6 7
3-BAND EQ
PFL
HPHONE VOL
CUE MIX
RECORD
MASTER
CROSSFADER
CH FADER
SYNC
PITCH FADER
PITCH BEND
SHIFT
HOT CUES
LOOP
RELOOP
AUTOLOOP
FX ON
FX SELECT
FX AMOUNT
MIC VOL
Adjusts the low, mid, and high frequencies for each
channel.
Allows the user to listen to a track without having
the audience hear.
Adjusts the volume of the headphone output
Adjusts the headphone mix between the cue
tracks and the master output.
Allows start/stop of software recording feature.
Adjusts the master volume of the unit’s output.
Allows you to mix evenly from one channel to another.
Adjusts the volume of the individual channel.
Pressing the SYNC button sets the tempo of the
track in the corresponding channel to the tempo of
the track in the other channel.
Adjusts the track’s playback pitch/tempo.
Momentarily raises or lowers the track’s pitch/tem-
po when depressed and returns back to the origi-
nal once released.
Activates secondary functions on the FIRSTMIX PRO.
Allows you to set and play hot cues 1, 2 and 3, which
jumps track playback position of the current track.
When SHIFT is active, hot cues 4, 5, 6 are active.
Engages or disengages the set loop. When SHIFT
is active, this sets the LOOP IN point.
Restarts the loop from the beginning point. When
SHIFT is active the sets the LOOP OUT point.
Sets programmed bar length beats automatically.
Rotating sets different loop lengths. Pushing in acti-
vates the loop. Pushing in again deactivates the loop.
Enables/disables the effect.
Toggles between effects. When SHIFT is enabled,
toggles between KEYLOCK and regular pitch mode.
Adjusts the parameter of the effect selected.
Adjusts the level of the microphone signal.
10
26
11
27
12
13
14
15
16
17
18
19
21
22
23
20
9
25
8 24
SPECIFICATIONS
Type of unit........................................................ USB MIDI controller
Power............................................................................... USB-Powered
Connector type................................................................. USB Type B
USB protocol support...................... 1.0, 1.1, and 2.0 (Hi-Speed)
Frequency Response................................ 20Hz-20KHz +/-1.5dB
Total Harmonic Distortion.................................. 0.01% 1KHz/0dB
Signal to Noise Ratio................................................................... 95dB
Dynamic Range.............................................................................. 95dB
Output Level....................................................................... +1dBV RMS
Headphone Impedance......................................................... 32 Ohm
MIC Input Level/Impedance............ 10 mV, 1 KOhm Balanced
Weight............................................................................................,. 4.3 lbs
1.95 kg
Dimensions....................................................... 14.6 x 9.1 x 2.4 inches
370 x 230 x 61 mm
Visit geminidj.com for more details, updates, and product
support