Operating instructions

BROWSE

LOAD A/B

JOGWHEEL

SCRATCH

PLAY/PAUSE

CUE

GAIN

TREBLE

CONTROL FUNCTION

Allows you to navigate through folders or tracks. Turn the

knob to the right to advance the selection, or turn the ro-

tary to the left to reverse the selection. Push the knob to

engage the selection.

When you have selected a le for play, it is assigned to

channel A or channel B by pressing the LOAD A or LOAD

B button.

Simulates a record feel and is used to SCRATCH or alter

the PITCH of a track, depending on which mode is en-

abled.

Pressing the SCRATCH button engages the unit in

scratch mode. The jogwheel is used to simulate the ef-

fect of scratching a record. When disengaged, the unit is

in PITCH mode. Turn the jogwheel clockwise to raise the

pitch and counter-clockwise to lower the pitch.

Engages the selected le. Pressing again temporarily

stops the ﬁle from playing, and freezes it in its current loca-

tion. Press again to start the le.

By default, when there is no CUE point set (or memorized),

pressing the CUE button returns the unit to the beginning

of the track (0:00.00) and pauses it. To set a CUE point

during playback at a time of your choice, simply press

PAUSE and then use the SEARCH function to make any

adjustments by frame. When the precise location is found,

press CUE to store this point.

While the unit is playing and after the cue point has been

programmed, pressing CUE will cause the player to enter

the PAUSE mode (PLAY/PAUSE BUTTON blinks) at the

programmed cue point (the CUE LED is lit).

Boosts the signal of each individual channel.

Adjusts the high frequencies for each channel.