User's Manual

6
GPLT Series
148.00 mm
105.00 mm
Bluetooth pair and connect
●Turn off any Bluetooth devices previously paired (linked) with this unit.
●Turn on the Bluetooth feature on your phone or music playing device.
●Press SOURCE button on GEMINI GPLT-360 to enter Bluetooth mode. LED “bt” on LED display
indicates it is in pairing mode.
●Set your phone or music player to search for Bluetooth devices.
●Select “GEMINI GPLT-360" from search results on your phone or music player.
●Select OK or YES to pair this unit with your phone or music player.
●If protected, enter 0000 for passkey steady blue light indicates successful connection.
●Hold pair key to disconnect current convection and eater pairing mode.
TWS (True Wireless Stereo) mode
1. Turn on 2 GEMINI GPLT-360 speakers and enter Bluetooth mode on both.
2. Press "TWS" key on each speaker for 2 seconds, it will show " " on display, TWS is
connecting to another speaker equipment and will connect successfully after a sound indication or
display shows "bt"
3. Turn on your Bluetooth feature on your mobile phone to search Bluetooth devices and select
“GEMINI GPLT-360" from the search result, select OK or YES to pair this unit with your mobile
phones and a steady blue light will indicate the connection is successful and can play any music
from your mobile phones.
Press "TWS" key on speaker unit for 2 seconds and it will turn off TWS features and display
" " on display. (The first speaker will the LEFT channel and the other speaker will be the
RIGHT channel.)
FM Radio Operation
1. Before using the radio functions, you must attach the supplied antenna. Adjust the antenna to
obtain optimum reception.
2. Press [SOURCE] to select FM mode.
3. Press the CH+/CH- key on the remote control or Hold the [ / ] key to skip to the preset
station.
4. Press the TU+/TU- key on the remote control or press the [ / ] key on the top panel to adjust
the radio frequency manually.
(The number key on the remote control can directly select the frequency. Such as enter “8,8,1" keys
for 88.1MHz, ”1,0,4,0" keys for 104.0MHz.)
Press the PLAY key on the remote control or Press the [ ] key on the top panel, the machine will
scan radio channels from low-frequency to high-frequency by itself and memorize the channels one
by one.