OPERATIONS MANUAL PS-540i PROFESSIONAL MIXER Page 1
PS-540i 33 20 48 29 21 41 34 35 22 15 42 23 14 36 43 16 44 24 30 17 37 45 39 26 27 25 31 40 38 18 46 32 Page 2
PS-540i Page 3
located on the rear panel. The stereo line inputs will accept any line level input such as a CD player, a cassette player, etc. INTRODUCTION t The phono inputs will accept only turntables with a magnetic cartridge. Congratulations on purchasing the Gemini PS540i mixer. This state of the art mixer includes the latest features and is backed by a three year limited warranty, excluding crossfader and channel slides. Prior to use, we suggest that you carefully read all the instructions. 6.
of one source into another. The left side of the CROSSFADER (32) is CHANNEL 1 and the right side is CHANNEL 2. 123456 123456 123456 123456 123456 123456 1. Unscrew the outside FADER PLATE SCREWS (B). - Do not touch INSIDE SCREWS (C). 2. Carefully remove old Crossfader and unplug CABLE (D). INPUTS: DJ Mic..............................................................................1.5mV 2 KΩ Balance 123 12 123 12 123 12 3. Plug new Crossfader into CABLE (D) and place back into mixer. 4.
In the USA: If you experience problems with this unit, call 1 (732) 969-9000 for Gemini Customer Service. Do not attempt to return this equipment to your dealer. Parts of the design of this product may be protected by worldwide patents. Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. Gemini Sound Products Corp.
