GEMINI PT-2000 HIGH-TORQUE DIRECT-DRIVE QUARTZ-LOCK PROFESSIONAL TURNTABLE INSTRUCTION MANUAL Page 1
Figure 1 10 13 14 12 11 18 9 23 25 7 28 24 8 22 5 1 20 21 6 4 2 3 17 26 19 Page 2 27 15 16
Figure 3A Figure 2 Figure 3B Page 3
Introduction Assembly and Set-Up Congratulations on purchasing a Gemini PT-2000 high-torque professional turntable. This state of the art turntable includes the latest features in modern direct drive turntable technology. Prior to use, we suggest that you carefully read all the instructions. NOTE: SEE FIG. 1 ( PAGE 1 ) FOR PART NUMBERS AND LOCATIONS. TURNTABLE PLATTER INSTALLATION: Set the TURNTABLE BASE (1) on a flat, level surface.
4. Place TONE ARM (5) on ARM REST (9) and lock it in place with the ARM CLAMP (8). 3. Keep the unit away from direct exposure to the sun, heat, moisture or dirt. 5. With the TONE ARM (5) locked on the ARM REST (9), hold the COUNTERWEIGHT (7) steady with one hand while rotating the STYLUS PRESSURE RING (10) until the numeral “0” on the ring aligns with the center line on the TONE ARM (5) rear shaft. The horizontal zero (0) balance should be completed. 4. Keep the unit well ventilated. 6.
TARGET LIGHT: Specifications 1. Push the TARGET LIGHT SWITCH (20) firmly and the TARGET LIGHT (21) will raise into position and illuminate the stylus tip. TURNTABLE SECTION: 2. To lower the TARGET LIGHT, push down on it until it locks in the casing. Drive Method.................................................................Direct Drive Type......................................Quartz Direct Drive Manual Turntable Motor........................................................Brushless DC Motor 18V 3.
In the USA: If you experience problems with this unit, call 1-732-738-9003 for Gemini Customer Service. Do not attempt to return this equipment to your dealer. Parts of the design of this product may be protected by worldwide patents. Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. Gemini Sound Products Corp.
