Bluetooth Tower Speaker User’s Guide for Model ITB124B v1028-01 For the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.
Important Safety Instructions Important Safety Instructions • • • • • • • • • • • • • • 2 Read these Instructions. Keep these Instructions. Heed all Warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Warnings and Precautions FCC Warnings Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Table of Contents Unboxing Your HD Tower Speaker ���������������������������������������������������������������������������������������������������������������������������������������������������5 Features & Specifications Includes Setup ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������5 Power Remote Battery Attaching the Stand Orientation ��������������
Unboxing Your HD Tower Speaker Features & Specifications • Supports Bluetooth v2.
Orientation Speaker Controls & Inputs LED Display Line In RCA Audio Input Power Pair Bluetooth Clock Set/ Play/Pause Skip/Search/ Tune -/+ Source Volume -/+ Speakers (x4) 6
Remote Layout Power Press to turn the unit on or off. Mute Press to mute the volume. FM Scan Press to begin scanning and saving FM radio frequencies. Source Press to cycle between Aux, Bluetooth, Line in, and FM radio. Recall Press to cycle through saved radio stations. Skip/Search/ Tune -/+ In FM mode, press to adjust frequency of the FM radio. In Bluetooth mode, press to skip or search through a track.
Audio Inputs Using the Stereo RCA Inputs When connecting two products using an RCA Cable, match the colored ports with the same colored connection. 8 1. Connect the RCA Cable to the RCA Stereo Inputs located on the back of the unit, and to the audio outputs on the television. 2. Press the Power button to power on the unit. 3. Press the Source button repeatedly to enter AUX Mode. 4. Audio played through the television will now be heard through the speakers.
Using the Line In 3.5 mm audio input cable not included. 1. Plug one end of a 3.5 mm audio input cable into the Line In on the unit, and plug the other end of the cable into the audio output/headphone output on an MP3 Player or other audio source. 2. Press the Power button to power the unit on. 3. Press the Source button repeatedly to enter Line In Mode. 4. Audio played through the connected device will now be heard through the speakers.
Bluetooth & Radio Pairing a Bluetooth Device for the First Time 1. Power on the unit by pressing the Power button. 2. Press the Source button on the remote to switch to Bluetooth Mode, indicated by a slowly flashing indicator on the display. 3. Press the Pair button on the top of the unit. The pairing indicator will flash quickly. When pairing, remain within 3 feet of the unit. 4. Using the native controls on your Bluetooth device, select the ITB124B in your Bluetooth settings to pair.
Clock Setting the Clock 1. With the unit powered off, press the Clock Set button. 2. The hour will begin to flash. 3. Press the Tuning+/- buttons to adjust the hour. 4. Press the Clock Set button. 5. The minute will begin to flash. 6. Press the Tuning+/- buttons to adjust the minute. 7. Press the Clock Set button again to finish setting the time.
Company Information Contact Information Warranty Website: www.iLiveElectronics.com Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 For Warranty Information and the most up-to-date version of this User’s Guide, go to: www.iLiveElectronics.com International Support To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.
