USER’S GUIDE V: 573-01 ITB382B Bluetooth 37” HD Sound Bar with Built-in Subwoofer
Warnings and Precautions CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. AVERTISSEMENT: Pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité. CAUTION: Use of any controls or adjustments or performance of procedures other than those herein specified may result in hazardous radiation exposure.
Important Safety Instructions 1. Read these Instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including 9.
ITB382B Features • • • • • • • • 37” length Supports Bluetooth v2.1 Supports profile A2DP (Advanced Audio Distribution Profile) Digital volume control FM Radio (PLL) Remote Learning remote control capability Bass controls • • • • • • • • • • • Treble controls Preset EQ Optical digital audio input 3.
Table of Contents Warnings and Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction 18V Subwoofer Output Optical Input FM Antenna Stereo RCA Audio Inputs Power Press to turn the unit on or off. POWER SOURCE S LEARN Volume Press to adjust the volume up or down. VOLUME PAIRING LINE IN Line Input L P Source Press to switch between Optical, Line In/AUX, Bluetooth, and FM Radio modes. Learn Press to begin using the learn function. Pairing Press to begin pairing with a Bluetooth device.
Power Press to turn the unit on or off. Optical Press to switch to Optical mode. BT Press to switch to Bluetooth Mode. Scan Press to scan for available radio stations in FM Radio mode. Music Press to switch to the EQ optimized for music. Treble Press to adjust the treble up or down. Bass Press to adjust the bass up or down Customer Support: 1-888-999-4215 Aux/Line Press to switch to Line In/AUX mode. AUX/ LINE BT Mute Press to mute the volume. FM Press to switch to FM Radio mode.
Audio Inputs & Subwoofer Output Using the Stereo RCA Inputs When connecting two products using an RCA Cable, match the colored ports with the same colored connection. Before use, disconnect any cables connected to the Line In. 1. Connect the RCA Cable to the RCA Stereo Inputs located on the back of the unit, and to the audio outputs on the television. 18V 2. Press the Power button to power on the unit. 3. Press the Source button repeatedly to enter Aux/Line Mode, indicated by a white light. 4.
Radio and Line In Tuning the Radio Using the Line In 1. Press the Source button repeatedly to enter FM Radio Mode, indicated by a green light. 1. Plug one end of a 3.5 mm audio input cable into the Line In on the unit. 2. Press the Scan button on the remote. 3.5 mm audio input cable not included. 3. The bar speaker will scan for all available stations, and store them. Before use, disconnect any cables connected to the Stereo RCA Inputs. 4.
Bluetooth Pairing a Bluetooth Device for the First Time Playing Audio Wirelessly 1. Power on the unit by pressing the Power button. 1. Follow the instructions for Pairing a Bluetooth Device. 2. Press the Source button repeatedly to enter Bluetooth mode, indicated by a blue light. 3. Press the Pairing button on the side of the unit. The Pairing Indicator will flash blue quickly. When pairing, remain within 3 feet of the unit. 4.
Learn Feature Understanding the Learn feature Using the Learn Feature What is the Learn feature? The Learn feature captures remote commands from your television remote, and teaches your bar speaker to operate when these commands are pressed. Power, volume and mute are a few examples of commands that the bar speaker can learn. 1. With the power Off, press the Learn button on the unit.
Company Information International Support Green Initiative To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en: www.iLiveElectronics.
