User's Manual

2.1. Mounting on the wooden wall

You should use

2 pieces of short screws 2 pieces of EVA

You will need :

• Level

• Pencil

• Tape Measure

• Manual or Electric drill

1. Use the TAPE MEASURE to decide how high you’d like to hang the sound bar on

the wall. The sound bar must be hung within 5 feet of an AC power outlet for the

attached AC power cord to reach.

2. Mark the position of the mounting screws on the wall using a pencil.

3. Line the LEVEL up on both of your mark sure they are level. If they're not, adjust the

marks as needed to make them level.

4. After you've double checked your marks, drill through the EVA with screw directly

into the marks that you have made on the wall.

5. Use the LEVEL to check that the mounting screws are level.

6. Put the sound bar onto the mounting brackets, and make sure there is a firm and

stable connection before letting go of the sound bar.

7. Finally, use the LEVEL to confirm that the sound bar is level.