User's Manual

LISTENING TO THE FM RADIO

TUNING THE FM RADIO

1. Tap the /STANDBY button on the remote control or press and hold the

/MODE button on main unit to turn on the unit.

2. Tap the FM/SCAN MODE button on remote control or tap the /MODE button on

main unit repeatedly to select FM radio mode, the Mode Indicator LED turns to

Yellow color.

3. Press and hold the FM/SCAN button on the remote control, unit will start to search

stronger FM stations and store them automatically, yellow LED flashing. Waiting for

the auto scan complete, it will stop at the first detected channel, yellow LED stop

flashing.

Note: Only radio stations detected during auto scan will be stored in the unit.

4. To manually tune a radio station, press the TUN +  / TUN -  button on the

remote control repeatedly to change stations. Yellow LED will flash on each press.

Use the manual tuning method to tune to weaker stations that are occasionally

skipped during Automatic Tuning.

5. To automatically tune to the next radio station with the strongest signal, press and

hold the  /  button on the remote for 1-2 seconds until the yellow FM indicator

begins to flash. Release the button, the tuner will stop scanning when it receives the

next strongest station signal.

6. Press the VOLUME +/- button to adjust the volume control to the desired level, If

necessary, press the MUSIC, MOVIE or VOICE button to select one of the preset

sound effects. Press the TREBLE +/- and BASS +/- buttons on the remote control to

adjust the separate treble and bass levels.

NOTE:

1.) Red LED will light and flash to acknowledge the VOLUME+/-, TREBLE+/- or

BASS +/- button is pressed. When the setting reaches its maximum or minimum

level, red LED will not light for indication.

2.) Press and hold the MUSIC Button, the sound effect will be reset to the default

(NORMAL) setting. The TREBLE and BASS settings will also be reset to the

center position.

FM & FM-Stereo reception

- When listening to the FM radio, the unit will automatically to switch between stereo

mode and mono mode. It depends on signal strength of FM stereo broadcasting.

HINTS FOR BEST RECEPTION:

To obtain the best FM/FM Stereo reception, unwrap and fully extend the FM

Antenna and adjust the position of the wire for best station reception