User's Manual

NOTE: Automatic tuning depends on the signal strength of the broadcasting station, so

weak stations may be skipped. You can manually tune to find the weak stations

if a station gets skipped. With strong signals, the tuner may stop before it

reaches the actual broadcast frequency, so you may need to manually tune for

the best reception.

RECALLING PRESET MEMORY CHANNELS

In radio mode, recall the pre-set channels detected in FM Scan by pressing the CH+/-

button on remote control repeatedly. Red LED will flash on each time you press the

CH+/- button.

BLUETOOTH OPERATION

PAIRING (LINKING) A BLUETOOTH ENABLED CELL PHONE OR OTHER

BLUETOOTH ENABLED DEVICE to the JSBW-210

1. With the power on, tap the Bluetooth button on remote control or tap the

/MODE button on main unit repeatedly to select Bluetooth mode. The Mode

Indicator LED turns blue and will be flashing. The JSBW-210 is now ready to pair

(link) with your Bluetooth device.

2. Turn on the Bluetooth feature of your cell phone and enable the search or scan

feature to find the JSBW-210.

3. Select "JSBW-210" from the device list when it appears on your device screen. If

required, enter the pass code “0000” to pair (link) the JSBW-210 with your cell

phone.

4. After successfully pairing (linking) your cell phone with the JSBW-210, the Mode

Indicator LED stops flashing and remains lit blue. You can now play music from

your cell phone or Bluetooth device wirelessly to the JSBW-210.

Note: If you want to connect the JSBW-210 to another cell phone after pairing

successfully, then you need to turn off the Bluetooth on the paired cell phone

first if it is in range before going through the above steps. Otherwise, the

JSBW-210 will automatically reconnect to the previously linked cell phone or

device.

5. Press the VOLUME +/- button to adjust the desired volume level.

6. To turn off the JSBW-210 Bluetooth, tap the /STANDBY button on remote

control or press and hold the /MODE button on main unit to turn the unit to

standby mode. Mode Indicator LED turns red. Don’t forget to also turn off the

Bluetooth feature on your cell phone or Bluetooth device.

Notes:

1.) Refer to manual of your cell phone or other Bluetooth enabled device for

Bluetooth operation, since it may vary from model to model.