User's Manual

2.) If your Bluetooth enabled device does not support A2DP, it will not play the music

through the speaker, even after it's paired (linked).

3.) If you are pairing (linking) your computer to the JSBW-210 using Bluetooth, you

may need to set the JSBW-210 as your computer’s default sound device.

CONTROLLING THE MUSIC PLAYBACK ON YOUR BLUETOOTH DEVICE USING

THE REMOTE CONTROL

1. Tap the /STANDBY button on remote control or press and hold the /MODE on

main unit to turn on the unit.

2. Turn on Bluetooth of your cell phone or device which was previously paired with the

JSBW-210, tap the Bluetooth button on remote control or tap /MODE button

on main unit repeatedly to select the Bluetooth mode, the Mode Indicator LED turns

blue and begins flashing.

3. After the Bluetooth device is paired with the JSBW-210, wait for around 5 seconds

and then press the PLAY/PAUSE button on remote control to start music

playback from your cell phone or Bluetooth device.

4. Press the PLAY/PAUSE button to pause or resume playback.

5. Press the VOLUME+/- button to adjust your desired volume level

6. If necessary, press the MUSIC, MOVIE or VOICE button on remote control to select

different sound effects or press the TREBLE or BASS +/- buttons on the remote

control to adjust the separate treble and bass levels.

7. Press the  or  button on the remote to select the desire music track.

8. Tap the /STANDBY button on remote control or press and hold the /MODE

button on main unit to turn off the unit after listening.

Re-linking to a cell phone or Bluetooth device

If your cell phone or Bluetooth device is already paired with the JSBW-210, but became

unlinked at some point, even with both Bluetooth devices turned on. You can re-link

them by:

1. Press and hold the

/PAIR button to re-link your cell phone. The Mode Indicator

LED will turn blue and flash while linking.

2. Select the JSBW-210 from the devices list on your cell phone for linking. The Mode

Indicator LED stops flashing and remains lit blue if the JSBW-210 and your cell

phone have been re-linked successfully.

3. You can also re-link the JSBW-210 by using Bluetooth operation of your cell phone.

Please refer to operation manual of your cell phone for more information.

PRESET SOUND EFFECTS (REMOTE CONTROL ONLY)

The JSBW-210 features 3 different sound effects to enhance your listening experience.

You can select the desired effect by pressing the MUSIC, MOVIE or VOICE button on

remote control, red LED will flash once to confirm. The red LED will not flash if the unit