User's Manual

14
already in relative sound effect mode.
In addition, you can adjust treble and bass effects by using the TREBLE & BASS +/-
buttons.
NOTE: Press the MUSIC button on remote control, sound effect will be reset to the
default (NORMAL) setting. The TREBLE and BASS settings will also be reset to the
center position.
MUTE (Remote Control Only)
- Press the MUTE button on remote control to mute the sound output from speaker
temporarily, the red LED will light and flash.
- Press the button again to resume to normal speaker playback.
LISTENING TO AUDIO FROM A TV/DVD PLAYER/VCR OR DVR
You can connect the JSBW-210 to other external audio devices using the AUX-IN 2
RCA connectors located on the back of the unit.
1. Connect the external TV/DVD/VCR/DVR to AUX-IN 2 RCA connectors on the back
of the unit (RCA connection cable included). Make sure the color coded plugs are
attached to the corresponding color coded connectors on the device.
2. Press the POWER button to turn the unit on.
3. Select external audio input by pressing the AUX 2 button on the remote control or tap
the /MODE button on the main unit repeatedly to select AUX IN 2 mode, Mode
Indicator LED turns White.
4. The volume level can now be controlled through the main unit. Operate all other
functions on the external device as usual.
OPTICAL (DIGITAL INPUT) OPERATION
NOTE: Digital Cable (Optical) is not included.
1. Ensure that the connections to the JSBW-210 are securely attached to the TV or
other audio device via Optical cable (not included).
2. Turn on the JSBW-210, press the OPTICAL button on remote control or repeatedly
tap the
/MODE BUTTON on the main unit to select the OPTICAL mode. LED
indicator turns to Orange.
3. Operate your connected audio device directly for playback features.
4. Press the VOLUME +/- BUTTON on remote control or main unit to adjust the audio
level.
NOTE: If no sound is heard from the JSBW-210, make sure the audio (digital output)
setting of your source player (e.g. TV, DVD player, game player) is set to PCM.