User's Manual

AUXILIARY INPUT

This unit provides an auxiliary audio signal input jack for connecting external audio

devices like MP3 players, CD players and listen to them through the speakers of this

unit.

1. Use an audio cable (included) with one 3.5 mm stereo plug on each end of the

cable.

2. Plug one end into the AUX-IN 1 jack on the right hand side (top panel) of main unit

and the other end of the cable into the Line-out Jack or Headphone Jack of your

external audio device.

3. Turn on the external audio device and the main unit.

4. To select auxiliary audio input, press the AUX 1 button on remote control or tap

/MODE button on main unit repeatedly to select AUX IN 1 mode, Mode Indicator

LED turns Green.

5. The volume level can now be controlled through the main unit. Operate all other

functions on the auxiliary device as usual.

NOTE:

 If you connect this unit to the Line-Out Jack of your external device then you only

need to adjust the volume control of this unit. If you connected the Headphone Jack

of your external device then you may need to adjust both the volume control of your

external device and the volume control of this unit to find the most desirable volume

setting.

 Press the POWER button to turning off the unit when you finish listening. Don't

forget to switch off the power of your external device as well.

CARE AND MAINTENANCE

1. Do not subject the unit to excessive force, shock, dust or extreme temperature.

2. Do not tamper the internal components of the unit.

3. Clean your unit with a dry cloth. Solvent or detergent should never be used.

4. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.

5. Keep your unit away from heating appliances and sources of electrical noise such as

fluorescent lamps or motors.

CLEANING THE UNIT

 To prevent fire or shock hazard, disconnect your unit from the AC power source

when cleaning.

 The finish on the unit may be cleaned with a dust cloth and cared for as other

furniture, Use caution when cleaning and wiping the plastic parts.

 If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax

or polish sprays on the cabinet.