Instructions / Assembly

2
OPERATION INSTRUCTIONS
“OFF/SENSOR” toggle switch is located on back of shoulders.
OFF: Slide switch to “OFF” position to deactivate the item.
SENSOR: Slide switch to “SENSOR” position, then make a noise or wave your hand in front of
figure to activate.
STORAGE
Do not discard box as it should be used for storage. It is helpful to loosen the belt before disassembly. Return
all parts to the original packaging. Store in a cool, dry location.
TROUBLE SHOOTING
If you have assembled the Life-Size Figure according to the instructions, but the head does not function properly,
the problem could be:
• The item is not securely plugged into a functioning wall outlet or extension cord
• The outlet or extension cord the unit is plugged into has no power
• The head may not be firmly attached; remove head and then reattach
FREQUENTLY ASKED QUESTIONS (FAQ’s)
1. I switched Figure on and it does not work. What can I do?
• First, ensure that the unit is plugged in. Next, ensure the toggle switch is in the desired position. Third, ensure
the outlet your unit is plugged into has power. Last, disconnect and reconnect head and check all adapter
connections.
2. I see this hole on back of shoulders. What is it for?
• This can simply be ignored. This was designed for “In-Store” Demonstration, allowing the retailer to plug in
a ‘TRY-ME’ button.
WARNING
SAFETY WARNING: Remove all plastic fasteners and tags. These are part of the packaging and
should be discarded.
For decorative purposes only. This is not a toy. Do not allow children to play with this product. Keep away from
fire and flame. Wipe clean the tray thoroughly before use. Tray is not suitable for microwave or dishwasher
use. Do not place more than 1 Kg on tray. Place the life size figure on a flat, level surface away from drafts and
where it does not cause any obstruction.
For indoor use only. This item is not a toy and should be used for decorative purposes only.