Datasheet
H-34
PRESSURE TRANSDUCERS
Visit www.GemsSensors.com for most current information.
3100-3200 Series / p5of5 / 24-MAR-16
Series
3100 / 3200 - Pressure Transducer –
Combination Pressure and Temperature
1
3101 / 3201 - Temp. Output Range -40°C to 125°C
3102 / 3202 - Temp. Output Range 0°C to 100°C
3103 / 3203 - Temp. Output Range 0°C to 80°C
Output
B - 4-20 mA C - 1-6 V H - 1-5 V
N - 0.5-4.5 V R - 0-5 V
2
S - 0-10 V
2
T - 0.5-4.5 V Ratiometric
Pressure Range – psi
100PG - 0-100 psiG 10CPG - 0-1,000 psiG 10KPS = 0-10,000 psiS
150PG - 0-150 psiG 15CPG - 0-1,500 psiG 15KPS - 0-15,000 psiS
3
200PG - 0-200 psiG 20CPS - 0-2,000 psiS 20KPS - 0-20,000 psiS
3
300PG - 0-300 psiG 25CPS - 0-2,500 psiS 25KPS - 0-25,000 psiS
3
500PG - 0-500 psiG 30CPS - 0-3,000 psiS
600PG - 0-600 psiG 35CPS - 0-3,500 psiS
750PG - 0-750 psiG 40CPS - 0-4,000 psiS
50CPS - 0-5,000 psiS
60CPS - 0-6,000 psiS
75CPS - 0-7,500 psiS
Pressure Range - bar
0007G - 0-7 barG 0160S - 0-160 barS 1000S - 1,000 barS
3
0010G - 0-10 barG 0250S - 0-250 barS 1600S - 1,600 barS
3
0016G - 0-16 barG 0400S - 0-400 barS
0025G - 0-25 barG 0600S - 0-600 barS
0040G - 0-40 barG
0060G - 0-60 barG
0100G - 0-100 barG
How to Order
Use the bold characters from the chart below to construct a product code
3100 B 200PG 02 B R 01
Cable Length (For electrical connections F& 3 only)
00 - No Cable
01 - 1 meter
02 - 2 meters
03 - 3 meters
04 - 4 meters
05 - 5 meters
Optional Restrictor (3200 only)
R - Restrictor
0 - No Restrictor
Electrical Connection
5
B - Industrial DIN 9.4 mm
(mating connector not supplied)
E - M12 x 1P (4-Pin)
F - Cable version
G - Large DIN
R - Industrial DIN 9.4 mm (alternate pin out)
3 - 1/2˝ NPT Male Conduit
6 - Amp - Superseal 1.5 Series
8 - Deutsch DT04-4P
9 - Packard MetriPack
Pressure Port
4
08 - 1/8-27 NPT External
02 - 1/4-18 NPT External
04 - 7/16-20 External (SAE #4, J514)
1J - 7/16-20 External (SAE #4, J1926-2)
0E - 1/4˝-18 NPT Internal
0K - M14 x 1.5 Straight
1G - Schrader SAE #4, 7/16˝ Internal
1P - SAE 6 (9/16˝-18 UNF 2A)
4C - 1/4-18 NPTF External (Dryseal)
4D - 1/8-27 NPTF External (Dryseal)
4N - SAE 3 (3/8-24 UNF External)
European Threads
01 - G1/4 External
05 - G1/4 External Soft Seal
0L - M12 x 1.5 (<1,000 bar, 15,000 psi)
2T - M12 x 1.5 (6g) (≥1,000 bar, 15,000 psi)
Notes:
1. Temperature outputs are for voltage output pressure sensors only
(applies to codes -C, -H, -N, and -T only) and limited to connections
that have 4 pins (Electrical codes -B, -E and -8). Accuracy is 3.5% of
temperature span. Requires additional 2mA of power.
2. For use with pull-up or pull-down resistors, contact factory.
3. Ranges 15,000 psi (1,000 bar) and above available with -2T
pressure port only.
4. Pressure ports OE and 1G are NOT available with the Restrictor
option.
5. For electrical codes F & 3, specify cable length in meters.
3
-Day
3
-Day
Delivery
on Most Transducers