User Manual

ManualsBrandsGemtek Technology ManualsElectronicsWireless AP Client

Before You Begin

You must have at least the following:

An Ethernet-enabled device, such as a game console, laptop or desktop computer,

network printer or set-top box that will connect to the DWL-810

Check Your Package Contents

These are the items included with your DWL-810 purchase:

If any of the above items are missing, please contact your reseller.

holders. Software and specifications subject to change without notice. DWL-810. 07082002

DWL-810

D-Link Air™

Ethernet-to-Wireless Bridge

• DWL-810 Ethernet-to-Wireless Bridge

• CD-ROM (containing Manual and Warranty)

• Ethernet (CAT5 UTP) Cable

• 5V DC 2.5A Power Adapter

Using a power

supply with a different

voltage rating will damage

this product and void its

warranty.

Web-based Configuration will

require a current web browser, i.e.,

Internet Explorer 5.x, Netscape

Navigator 4.x.

Summary of content (9 pages)

PAGE 1
Web-based Configuration will require a current web browser, i.e., Internet Explorer 5.x, Netscape Navigator 4.x.
PAGE 2
Connecting the DWL-810 Ethernet-to-Wireless Bridge to your Ethernet-enabled device If you are wirelessly connecting the DWL-810 to an Access Point or Wireless Router on a larger wireless network, additional configuration is required (see Step 3 ) A. First, connect the power adapter to the receptor at the back panel of the DWL-810 and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation. B.
PAGE 3
How the DWL-810 Ethernet-to-Wireless Bridge Connects to other Wireless Devices When you have completed the steps in this Quick Installation Guide, and you have connected the DWL-810 to your host computer, set top box, or gaming console, you will be able to wirelessly connect to other 802.11b wireless devices to share files, join multiplayer video games or even share your internet connection over the wireless network (Setup #2.
PAGE 4
Setup #2 Wireless Router If you are connecting in Setup #2 mode (as shown above), please continue to Step 3 in this guide.
PAGE 5
Web-based Configuration If you need to configure the DWL-810, follow the steps below: Before You Begin the Configuration It’s best to use a computer (with an Ethernet adapter) that is connected directly to the DWL-810 for configuration. The default IP address for the DWL-810 is 192.168.0.30 with a Subnet Mask of 255.255.255.0. You will need to assign your computer a Static IP address within the same range as the DWL-810’s IP address in order to configure the DWL-810.
PAGE 6
Configuration Click Wireless in the Configuration menu. This screen will appear. Select Infrastructure default The default wireless settings are: SSID = default Channel = 6 You can change the SSID and Channel settings to match an existing wireless network. Click on Apply Changes will not take effect until you reboot the DWL-810. To reboot, click on Admin at the top of this screen. In the Admin window, click reboot to save the changes.
PAGE 7
Go to Start > Double- click on Control Panel > Double-click on Network Connections > Right-click on Local Area Connections > Click Properties Highlight Internet Protocol (TCP/IP) D-Link DWL-650+ Click Properties Select Use the following IP address in the Internet Protocol (TCP/IP) Properties window Input your IP address and subnet mask. (The IP Address must be within the same range as the DWL810. The IP Address of the DWL-810 is 192.168.0.30. You can assign 192.168.0.2 for your laptop.
PAGE 8
Technical Support You can find the most recent software and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product. U.S. customers can contact D-Link technical support through our web site or by phone. D-Link Technical Support over the Telephone: (877) 453-5465 24 hours a day, seven days a week D-Link Technical Support over the Internet: http://support.dlink.com email: support@dlink.
PAGE 9
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.