User's Manual

17
5 Troubleshooting
Q: If IP Address does not find the Wireless Ethernet Adapter you are
looking for.
A: There are several possible causes depending on the way the Wireless
Ethernet Adapter is connected to the network.
a. Problems on the wireless side
Always check the status of the LEDs to see whether you have:
•electricity problems,
•radio signal problems,
•networking problems.
1. Possible cause: Is the Wireless Ethernet Adapter powered up ?
Solution: Check the power LED. Check if the Wireless Ethernet Adapter is
connected.
2. Possible cause: Is the Wireless Ethernet Adapter is in range of the Access
Point?
Solution: Check the ACT signal LED. Check for possible problems with
respect to range.
3. Possible cause: Is there a network connection? Check the network LINK
LED.
Solution: The Wireless Ethernet Adapter may take up to a minute to find an
IP address.
b. Problems on the wired side
Always check if your cables and connections are in good order and properly
installed.
1. Possible cause: Has the proper cable been used?
Solution: • If the Wireless Ethernet Adapter is connected to a hub, a
‘normal ’ (not a crossover) cable must be used.
• If the Wireless Ethernet Adapter is connected directly to a
computer, a crossover cable must be used.