User Manual

BW1251 Nov 15, 2006
Browan Page 22 of 72
Reset – rebooting device and restoring systems to the factory default
Upgrade – Upgrading the firmware remotely
In the following sections, short references for all menu items are presented.
Status
Status | Device Status
The device status page shows important information of the BW1251, its system status and network
configuration.
Figure 12 – Device Status
System Version – displaying the current firmware version of the BW1251
This is important information when seeking support from BROWAN and preparing
firmware upgrading
Uptime – indicating the time, expressed in days, hours and minutes since the system was last
rebooted.
System Time – showing the current time of the BW1251.
Wlan1 MAC / Wlan2 MAC – showing the MAC addresses of the two wireless interfaces of the
BW1251
Free System Memory – indicating the memory currently available in the BW1251
Total System Memory – indicating the total memory in the BW1251
LAN Mode – indicating whether static IP or DHCP client is used for BW1251 LAN IP address
LAN IP – showing the LAN IP address of BW1251
LAN Mask – showing the LAN Network Mask of BW1251
Gateway – showing the default gateway of BW1251