User Manual

BW1251 Nov 15, 2006
Browan Page 33 of 72
Figure 30 – DHCP Relay settings
Server IP – the IP address of the external DHCP server.
Only one DHCP server can be supported for DHCP relay feature.
Change status or leave the default state if no editing is necessary and click the Save button.
Figure 31 –Apply or Discard DHCP relay Settings
Every time settings are changed, the BW1251 needs to be restarted to apply all settings changes
when clicking Apply Changes. Request for server reboot appears:
Figure 32 – Reboot information
Reboot – restarting the server and applying the changes.
If there is no other setting needed to be modified, click the Reboot button to apply
all modifications.
And if there are still other setting modifications needed, go ahead to finish all
changes and then click Reboot button to restart and apply all settings together.