User Manual

BW1251 Nov 15, 2006
Browan Page 42 of 72
Radio Name – specifying the wireless interface of the BW1251
Domain – selecting the regulatory domain according to your country
The full frequency range between 2.4 GHz and 5 GHz is not permitted for use in all countries.
Depending on your selection of regulatory domains, the available frequency channels will vary.
Before changing radio settings manually, make sure that your settings comply with the
government regulations. At all times, it‘s the responsibility of the end-user to ensure that
the installation complies with local radio regulations. Refer to the Appendix:
General Configuration Settings
Administrator Username admin
Administrator Password admin01
Get Community Public
Set Community Private
Network Configuration Settings
IP address (static IP) 192.168.2.2
Subnet mask 255.255.255.0
Gateway 0.0.0.0
Service Configuration Settings
DHCP server Disable
DHCP relay Disable
NTP service Disable
Telnet service Enable
SSH service Enable
Wireless Configuration Settings
RF Card 1(WLAN1)
Default Mode 11g Access Point
Regulatory Domain World
SSID BW1251g
Default channel 1
RTS Threshold 2347 bytes
RF Output Power 19dBm
Authentication Type Open System
MAC ACL Disable
Encryption Off
Security Policy Disable
RF Card 2(WLAN2)
Default Mode 11a Access Point
Regulatory Domain World
SSID BW1251a
Default channel 36
RTS Threshold 2347 bytes
Output Power 18dBm
Authentication Type Open System
MAC ACL Disable
Encryption Off