User Manual

BW1251 Nov 15, 2006
Browan Page 56 of 72
You must create MAC List to work with Policy setting. The access control list is based on the
network device’s MAC address. In the MAC ACL Configuration table, you only need to specify the
MAC address of wireless client. Click the Add button to create a new MAC entry:
Figure 63 – Add MAC entry
MAC Address – the physical address of the network device (MAC address) you need to configure.
The format is a list of colon separated hexadecimal numbers (for example: 00:AA:A2:5C:89:56).
Save – saving the new MAC entry.
Figure 64 – Apply or Discard MAC ACL Configuration Changes
Apply Changes – saving all changes made in the interface table at once.
Discard Changes – restoring all previous values.
Every time settings are changed, the BW1251 needs to be restarted to apply all settings changes
when clicking Apply Changes. Request for server reboot appears: