User Manual

Upstream Quality of Service
4030765 Rev 01 169
2 Click Add. The Add Upstream QoS Rule screen opens.
3 In the Name field, enter the name of the QoS rule.
4 In the LAN Port field, select the LAN port for which you want to apply the rule.
5 In the Protocol field, select the protocol that you want to use from the following
options:
 TCP/UDP
 TCP
 UDP
 ICMP
6 In the IP Address field, enter the source and destination addresses.
7 In the Subnet Mask field, enter the source and destination subnet masks.
8 In the Port Number field, enter the source and destination ports.
9 In the MAC address field, enter the MAC address for the source from which the
packets are being sent.
10 In the MAC Mask field, enter the mask for the source from which the packets are
being sent.
Q. to reviewers Fields changed update
3-6-2009 Draft