User Manual

Cha
p
te
r
7 Advanced Confi
g
uration
180 4030765 Rev 01
4 From the Virtual Servers Setup screen, click Add. The NAT Virtual Servers
screen opens.
5 Under Server Name, choose one of the following:
 Click Select a Service, and choose a service from the drop-down list.
OR
 Click Custom Server, and enter a server name and the Server IP Address.
6 In the Server IP Address field, enter the IP address for the server.
7 Under Protocol, select TCP, UDP, TCP/UDP.
8 Click Save/Apply to add the virtual server.
Removing a Virtual Server
To remove a virtual server, complete the following steps.
1 Click Advanced on the main screen.
3-6-2009 Draft