User Manual

Cha
p
te
r
7 Advanced Confi
g
uration
186 4030765 Rev 01
DMZ Host Setup
The NAT -- DMZ Host screen allows the IP packets from the WAN that do not
belong to any of the applications configured in the Virtual Servers table to be
forwarded to the DMZ (demilitarized zone) host computer.
Path: Advanced > IP Networking > NAT > DMZ Host > NAT -- DMZ Host
Activate the DMZ Host
In the DMZ Host IP Address field, enter the computer's IP address and click
Save/Apply to activate the DMZ host.
Deactivate the DMZ Host
Clear the DMZ Host IP Address field and click Save/Apply to deactivate the DMZ
host.
3-6-2009 Draft