User Manual

Internet Group Management Protocol
4030765 Rev 01 193
Internet Group Management Protocol
IGMP screen allows you to configure the Internet group management protocol
(IGMP) parameters. The Internet Group Management Protocol is a communications
protocol that is used to manage the membership of Internet Protocol multicast
groups. Routers use IGMP to manage multicasting. The IGMP messages are used to
determine which hosts are part of which multicast groups.
Path: Advanced > IP Networking > IGMP
The
Enabling IGMP Snooping
IGMP snooping is???? Reviewer question
To enable IGMP snooping, complete the following steps.
1 Select the Enable IGMP snooping field.
2 In the Query Interval field, enter the interval in seconds.
3 In the Query Response Interval field, enter the interval in seconds.
4 In the Query Version field, choose the version from the drop-down list.
5 In the Last member Query Interval field, enter the interval in seconds.
6 In the Last member Query Count field, enter the number of times you want the
system to query.
7 Click Save/Reboot to save your changes and reboot the system.
3-6-2009 Draft