User Manual

Cha

4 DSL Confi

uration

88 4030765 Rev 01

3 Do you want to automatically select the modulation?

 If yes, make sure the Automatic select check box is checked under Select the

modulation below field. Go to step 5.

 If no, uncheck the Automatic Select check box. A list of modulation types

appears.

4 Under the Select the modulation below area on the screen, select the modulation

that you want to use. You can select one or all of the following modulations:

 G.Dmt Enabled

 G.lite Enabled

 T1.413 Enabled

 ADSL2 Enabled

 AnnexL Enabled

 ADSL2+ Enabled

 AnnexM Enabled

5 Under the Capability field, select the capability that you want to use from the

following options:

 Bitswap Enable

 SRA Enable

6 Click Save/Apply to save the configuration.

3-6-2009 Draft