User Manual

System Log Configuration
4030765 Rev 01 61
 Debugging
7 In the Display Level field, select the level of the logged events that you want to
display from the following options. All logged events above or equal to the
selected level will be displayed.
 Emergency
 Alert
 Critical
 Error
 Warning
 Notice
 Informational
 Debugging
8 Select the mode for the logging from the following options. If the selected mode
is "remote" or "both," events are sent to the specified IP address and UDP port of
the remote syslog server. If the selected mode is "local" or "both," events are
recorded in the local memory.
 Local. Events are logged in memory. You must log in to the device to display
the events.
 Remote. Events log is sent to a remote server (syslog server).
 Both. Events are logged in memory and are sent to the remote server.
9 Click Save/Apply to start logging events.
Disabling Logging
To disable the logging function, complete the following steps.
Q. to reviewer test this procedure against application
1 Click System on the main screen.
2 Click Management. The Configuration screen opens with the Configuration tab
in the forefront.
3-6-2009 Draft