User Manual

Cha

5 Home Network Confi

uration

114 4030765 Rev 01

 For 64-bit encryption, repeat steps 9 and 10 for keys 2 through 4 if you use 64-

bit encryption. If you use 128-bit encryption, only one network key is

required. Go to step 14.

 For 128-bit encryption, only one network key is used. Go to step 13.

12 In the WEP Key Paraphrase field, enter your information as follows based on 64-

bit or 128-bit encryption strength:

 For 64-bit encryption strength, enter a passphrase (1 to 31 characters) and

click Generate. Four keys are generated based on the passprhase.

 For 1280bit encryption, enter a passphrase (1 to 31 characters) and click

Generate. A single key is generated based on the passprhase.

13 Click Save/Apply.

Securing Your Wireless Network with Encryption Keys

If you choose WPA-PSK (Wi-Fi Protected Access-PreShared Key) as the network

authentication method, you can secure your network by encrypting all traffic using a

pre-shared dynamic key.

To secure your wireless network with a preshared dynamic key, complete the

following steps.

1 Click Home Network on the main screen. The Client Summary screen opens.

2 Click Wireless. The Wireless Summary screen opens.

3-6-2009 Draft