User Manual

MAC Filtering Setup
4030765 Rev 01 131
9 Do you want to select all WAN interfaces?
 If yes, check the Select All WAN Interfaces check box under the WAN
Interfaces (Configured in Bridge mode only) field.
 If no, uncheck the Select All WAN Interfaces check box under the WAN
Interfaces (Configured in Bridge mode only) field.
10 Click Save/Apply to add the MAC Filter.
Forwarding or Blocking MAC Layer Frames
You can change the policy on how MAC layer frames are forwarded or blocked.
FORWARDED means that all MAC layer frames will be forwarded except those
matching with any of the specified rules in the table on the screen. BLOCKED means
that all MAC layer frames will be blocked except those matching with any of the
specified rules in the table on the screen.
To change the policy on how MAC layer frames are forwarded or blocked, complete
the following steps.
1 Click Security on the main screen. The Packet Filtering tab opens by default.
2 Click MAC Filtering. The MAC Filtering screen opens.
3 Check the Enable Filtering Function check box.
3-6-2009 Draft