User Manual Part 1

United States FCC Compliance

4020210 Rev

The modem may not be connected to a party line or to a coin-operated telephone.

2 Notification to the telephone company is no longer required prior to connecting

registered equipment, but upon request from the telephone company, the user shall tell

the telephone company which line the equipment is connected to as well as the

registration number and ringer equivalence number of the registered protective circuitry.

FCC information is printed on a label on the bottom of the modem.

This equipment complies with Part 68 of FCC Rules and the requirements adopted by the

ACTA. On the base unit of this equipment is a label that contains, among other information,

a product identifier in the format US: US:GEMDL01BDDR2200. If requested, this number

must be provided to the telephone company.

The REN is useful to determine the quantity of devices you may connect to your telephone

line and still have those devices ring when your telephone number is called. In most, but not

all areas, the sum of the REN of all devices connected to one line should not exceed five (5.0).

To be certain of the number of devices you may connect to your line, as determined by the

REN, you should contact your local telephone company to determine the maximum REN for

your calling area.

If your equipment causes harm to the telephone network, the telephone company may

discontinue your service temporarily. If possible, they will notify you in advance. If advance

notice is not practical, you will be notified as soon as possible. You will be informed of your

right to file a complaint with the FCC. Your telephone company may make changes in its

facilities, equipment, operations or procedures that could affect the proper functioning of

your equipment. If they do, you will be notified in advance to give you an opportunity to

maintain uninterrupted telephone service.

If you experience trouble with this telephone equipment, please contact the service provider

for information on obtaining service or repairs.

The telephone company may ask that you disconnect this equipment from the network until

the problem has been corrected or until you are sure that the equipment is not

malfunctioning.

This equipment may not be used on coin service provided by the telephone company.

Connection to party lines is subject to state tariffs.

IC (Industry Canada) Notice

Notice: The Industry Canada (formerly Canadian Department of Communications) label

identifies certified equipment. This certification means that the equipment meets certain

telecommunications network protective, operational, and safety requirements. The

department does not guarantee the equipment will operate to the user's satisfaction.

Before installing this equipment, users should ensure that it is permissible to be connected to

the facilities of the local telecommunications company. The equipment must also be installed

using an acceptable method of connection. In some cases, the company's inside wiring

associated with a single-line individual service may be extended by means of a certified

connector assembly (telephone extension cord). The customer should be aware that

compliance with the above conditions may not prevent degradation of service in some

situations.